summaryrefslogtreecommitdiff
path: root/drivers/usb/serial (follow)
Commit message (Collapse)AuthorAge
...
* USB: serial: option: add support for Thales Cinterion EXS82Giacinto Cifelli2020-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6d6556c04ebaeaf4e7fa8b791c97e2a7c41b38a3 upstream. There is a single option port in this modem, and it is used as debug port. lsusb -v for this device: Bus 001 Device 002: ID 1e2d:006c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006c bcdDevice 0.00 iManufacturer 4 iProduct 3 iSerial 5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 243 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 2 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 1 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 2 CDC Union: bMasterInterface 1 bSlaveInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 3 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 4 CDC Union: bMasterInterface 3 bSlaveInterface 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 5 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 5 bSlaveInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Fibocom NL668 variantsVincent Palatin2020-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5e4d659b10fde14403adb2e215df4a3168fe8465 upstream. Update the USB serial option driver support for the Fibocom NL668 Cat.4 LTE modules as there are actually several different variants. Got clarifications from Fibocom, there are distinct products: - VID:PID 1508:1001, NL668 for IOT (no MBIM interface) - VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas and Europe. usb-devices output for the laptop M.2 cards: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a0 Rev=03.18 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom NL652-EU Modem S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ch341: sort device-id entriesJohan Hovold2020-12-11
| | | | | | | | | | | | | commit bf193bfc12dbc3754fc8a6e0e1e3702f1af2f772 upstream. Keep the device-id entries sorted to make it easier to add new ones in the right spot. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ch341: add new Product ID for CH341AJan-Niklas Burfeind2020-12-11
| | | | | | | | | | | | | | | | | commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63 upstream. Add PID for CH340 that's found on a ch341 based Programmer made by keeyees. The specific device that contains the serial converter is described here: http://www.keeyees.com/a/Products/ej/36.html The driver works flawlessly as soon as the new PID (0x5512) is added to it. Signed-off-by: Jan-Niklas Burfeind <kernel@aiyionpri.me> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: kl5kusb105: fix memleak on openJohan Hovold2020-12-11
| | | | | | | | | | | | commit 3f203f057edfcf6bd02c6b942799262bfcf31f73 upstream. Fix memory leak of control-message transfer buffer on successful open(). Fixes: 6774d5f53271 ("USB: serial: kl5kusb105: fix open error path") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas2020-11-10
| | | | | | | | | | | | | | | commit db0362eeb22992502764e825c79b922d7467e0eb upstream. Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas2020-11-10
| | | | | | | | | | | | | | | | | | commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream. Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: cyberjack: fix write-URB completion raceJohan Hovold2020-11-10
| | | | | | | | | | | | | | | commit 985616f0457d9f555fff417d0da56174f70cc14f upstream. The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adaptersMychaela N. Falconia2020-10-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6cf87e5edd9944e1d3b6efd966ea401effc304ee upstream. There exist many FT2232-based JTAG+UART adapter designs in which FT2232 Channel A is used for JTAG and Channel B is used for UART. The best way to handle them in Linux is to have the ftdi_sio driver create a ttyUSB device only for Channel B and not for Channel A: a ttyUSB device for Channel A would be bogus and will disappear as soon as the user runs OpenOCD or other applications that access Channel A for JTAG from userspace, causing undesirable noise for users. The ftdi_sio driver already has a dedicated quirk for such JTAG+UART FT2232 adapters, and it requires assigning custom USB IDs to such adapters and adding these IDs to the driver with the ftdi_jtag_quirk applied. Boutique hardware manufacturer Falconia Partners LLC has created a couple of JTAG+UART adapter designs (one buffered, one unbuffered) as part of FreeCalypso project, and this hardware is specifically made to be used with Linux hosts, with the intent that Channel A will be accessed only from userspace via appropriate applications, and that Channel B will be supported by the ftdi_sio kernel driver, presenting a standard ttyUSB device to userspace. Toward this end the hardware manufacturer will be programming FT2232 EEPROMs with custom USB IDs, specifically with the intent that these IDs will be recognized by the ftdi_sio driver with the ftdi_jtag_quirk applied. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [johan: insert in PID order and drop unused define] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: pl2303: add device-id for HP GC deviceScott Chen2020-10-17
| | | | | | | | | | | | commit 031f9664f8f9356cee662335bc56c93d16e75665 upstream. This is adds a device id for HP LD381 which is a pl2303GC-base device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: Add Telit FT980-KS compositionLeonid Bloch2020-10-17
| | | | | | | | | | | | | | | | | | commit 924a9213358fb92fa3c3225d6d042aa058167405 upstream. This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch <lb.workbox@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Cellient MPL200 cardWilken Gottwalt2020-10-17
| | | | | | | | | | | | | commit 3e765cab8abe7f84cb80d4a7a973fc97d5742647 upstream. Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3db5418fe9e516f4b290736c5a199c9796025e3c.1601715478.git.wilken.gottwalt@mailbox.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modulesAleksander Morgado2020-09-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1ac698790819b83f39fd7ea4f6cdabee9bdd7b38 upstream. These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: add IDs for Xsens Mti USB converterPatrick Riphagen2020-09-23
| | | | | | | | | | | | | commit 6ccc48e0eb2f3a5f3bd39954a21317e5f8874726 upstream. The device added has an FTDI chip inside. The device is used to connect Xsens USB Motion Trackers. Cc: stable@vger.kernel.org Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: clean up receive processingJohan Hovold2020-08-21
| | | | | | | | | | | | | | [ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ] Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: ftdi_sio: make process-packet buffer unsignedJohan Hovold2020-08-21
| | | | | | | | | | | [ Upstream commit ab4cc4ef6724ea588e835fc1e764c4b4407a70b7 ] Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: qcserial: add EM7305 QDL product IDErik Ekman2020-08-21
| | | | | | | | | | | | | | | | | | | | | | | | | | commit d2a4309c1ab6df424b2239fe2920d6f26f808d17 upstream. When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by: Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Quectel EG95 LTE modemAceLan Kao2020-07-22
| | | | | | | | | | | | | | | | | | | | | | | | commit da6902e5b6dbca9081e3d377f9802d4fd0c5ea59 upstream. Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add GosunCn GM500 seriesJörgen Storvist2020-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 08d4ef5cc9203a113702f24725f6cf4db476c958 upstream. Add USB IDs for GosunCn GM500 series cellular modules. RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ch341: add new Product ID for CH340Igor Moura2020-07-22
| | | | | | | | | | | | | | | | | | | | commit 5d0136f8e79f8287e6a36780601f0ce797cf11c2 upstream. Add PID for CH340 that's found on some ESP8266 dev boards made by LilyGO. The specific device that contains such serial converter can be seen here: https://github.com/LilyGO/LILYGO-T-OI. Apparently, it's a regular CH340, but I've confirmed with others that also bought this board that the PID found on this device (0x7522) differs from other devices with the "same" converter (0x7523). Simply adding its PID to the driver and rebuilding it made it work as expected. Signed-off-by: Igor Moura <imphilippini@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: cypress_m8: enable Simply Automated UPB PIMJames Hilliard2020-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5c45d04c5081c1830d674f4d22d4400ea2083afe upstream. This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface. Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's. The vendor UPB application source contains the following USB ID's: #define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500 #define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500 The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected. Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold2020-07-22
| | | | | | | | | | | | | commit e7b931bee739e8a77ae216e613d3b99342b6dec0 upstream. The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Telit LE910C1-EUX compositionsDaniele Palmas2020-06-11
| | | | | | | | | | | | | | | | commit 399ad9477c523f721f8e51d4f824bdf7267f120c upstream. Add Telit LE910C1-EUX compositions: 0x1031: tty, tty, tty, rmnet 0x1033: tty, tty, tty, ecm Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: usb_wwan: do not resubmit rx urb on fatal errorsBin Liu2020-06-11
| | | | | | | | | | | | | | | commit 986c1748c84d7727defeaeca74a73b37f7d5cce1 upstream. usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb status is a fatal error. Or the usb controller would keep processing the new urbs then run into interrupt storm, and has no chance to recover. Fixes: 6c1ee66a0b2b ("USB-Serial: Fix error handling of usb_wwan") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: qcserial: add DW5816e QDL supportMatt Jolly2020-06-11
| | | | | | | | | | | | | | | commit 3429444abdd9dbd5faebd9bee552ec6162b17ad6 upstream. Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode / QDL download mode) to drivers/usb/serial/qcserial.c This is required to update device firmware. Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: garmin_gps: add sanity checking for data lengthOliver Neukum2020-05-20
| | | | | | | | | | | | | | commit e9b3c610a05c1cdf8e959a6d89c38807ff758ee6 upstream. We must not process packets shorter than a packet ID Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: qcserial: Add DW5816e supportMatt Jolly2020-05-20
| | | | | | | | | | | | commit 78d6de3cfbd342918d31cf68d0d2eda401338aef upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callbackQiujun Huang2020-04-02
| | | | | | | | | | | | | | | | | commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream. Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Wistron Neweb D19Q1Pawel Dembicki2020-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream. This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add BroadMobi BM806UPawel Dembicki2020-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream. BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2033 Rev= 2.28 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=f842866cfd5a C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add support for ASKEY WWHC050Pawel Dembicki2020-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 007d20dca2376a751b1dad03442f118438b7e65e upstream. ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Co-developed-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: pl2303: add device-id for HP LD381Scott Chen2020-04-02
| | | | | | | | | | | | | commit cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream. Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add ME910G1 ECM composition 0x110bDaniele Palmas2020-04-02
| | | | | | | | | | | | | commit 8e852a7953be2a6ee371449f7257fe15ace6a1fc upstream. Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ir-usb: fix IrLAP framingJohan Hovold2020-02-05
| | | | | | | | | | | | | | | | | commit 38c0d5bdf4973f9f5a888166e9d3e9ed0d32057a upstream. Commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") switched to using the generic write implementation which may combine multiple write requests into larger transfers. This can break the IrLAP protocol where end-of-frame is determined using the USB short packet mechanism, for example, if multiple frames are sent in rapid succession. Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") Cc: stable <stable@vger.kernel.org> # 2.6.35 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ir-usb: fix link-speed handlingJohan Hovold2020-02-05
| | | | | | | | | | | | | | | | | | | | commit 17a0184ca17e288decdca8b2841531e34d49285f upstream. Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header. This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl). Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable <stable@vger.kernel.org> # 2.6.27 Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ir-usb: add missing endpoint sanity checkJohan Hovold2020-02-05
| | | | | | | | | | | | | | | | | | | | commit 2988a8ae7476fe9535ab620320790d1714bdad1d upstream. Add missing endpoint sanity check to avoid dereferencing a NULL-pointer on open() in case a device lacks a bulk-out endpoint. Note that prior to commit f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") the oops would instead happen on open() if the device lacked a bulk-in endpoint and on write() if it lacked a bulk-out endpoint. Fixes: f4a4cbb2047e ("USB: ir-usb: reimplement using generic framework") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: keyspan: handle unbound portsJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | [ Upstream commit 3018dd3fa114b13261e9599ddb5656ef97a1fa17 ] Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | [ Upstream commit e37d1aeda737a20b1846a91a3da3f8b0f00cf690 ] Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: io_edgeport: use irqsave() in USB's complete callbackJohn Ogness2020-01-23
| | | | | | | | | | | | | | | | | [ Upstream commit dd1fae527612543e560e84f2eba4f6ef2006ac55 ] The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
* USB: serial: quatech2: handle unbound portsJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | | | | | commit 9715a43eea77e42678a1002623f2d9a78f5b81a1 upstream. Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <stable@vger.kernel.org> # 3.5 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | commit 1568c58d11a7c851bd09341aeefd6a1c308ac40d upstream. The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold2020-01-23
| | | | | | | | | | | | | | | commit 4d5ef53f75c22d28f490bcc5c771fcc610a9afa4 upstream. Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: suppress driver bind attributesJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | | | | | | commit fdb838efa31e1ed9a13ae6ad0b64e30fdbd00570 upstream. USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: opticon: fix control-message timeoutsJohan Hovold2020-01-23
| | | | | | | | | | | | | | | | | | | | commit 5e28055f340275a8616eee88ef19186631b4d136 upstream. The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on open() or tiocmset() due to a malfunctioning (or malicious) device until the device is physically disconnected. The USB upper limit of five seconds per request should be more than enough. Fixes: 309a057932ab ("USB: opticon: add rts and cts support") Cc: stable <stable@vger.kernel.org> # 2.6.39 Cc: Martin Jansen <martin.jansen@opticon.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xxJerónimo Borque2020-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 260e41ac4dd3e5acb90be624c03ba7f019615b75 upstream. Add device-ids for the Motorola Solutions TETRA radios MTP3xxx series and MTP85xx series $ lsusb -vd 0cad: Bus 001 Device 009: ID 0cad:9015 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9015 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Bus 001 Device 010: ID 0cad:9013 Motorola CGISS TETRA PEI interface Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9013 bcdDevice 24.16 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add ZLP support for 0x1bc7/0x9010Daniele Palmas2020-01-14
| | | | | | | | | | | | | | commit 2438c3a19dec5e98905fd3ffcc2f24716aceda6b upstream. Telit FN980 flashing device 0x1bc7/0x9010 requires zero packet to be sent if out data size is is equal to the endpoint max size. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> [ johan: switch operands in conditional ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add Telit ME910G1 0x110a compositionDaniele Palmas2020-01-12
| | | | | | | | | | | | | | commit 0d3010fa442429f8780976758719af05592ff19f upstream. This patch adds the following Telit ME910G1 composition: 0x110a: tty, tty, tty, rmnet Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: io_edgeport: fix epic endpoint lookupJohan Hovold2019-12-21
| | | | | | | | | | | | | | | | | commit 7c5a2df3367a2c4984f1300261345817d95b71f8 upstream. Make sure to use the current alternate setting when looking up the endpoints on epic devices to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Cc: stable <stable@vger.kernel.org> # 2.6.21 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ftdi_sio: add device IDs for U-Blox C099-F9PFabio D'Urso2019-12-05
| | | | | | | | | | | | | | | | | | | | | | commit c1a1f273d0825774c80896b8deb1c9ea1d0b91e3 upstream. This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdf Signed-off-by: Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: option: add support for Foxconn T77W968 LTE modulesAleksander Morgado2019-11-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f0797095423e6ea3b4be61134ee353c7f504d440 upstream. These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations. P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> [ johan: drop id defines ] Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-04-23 20:54:39 +0000