| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add diag_bridge driver which is used to communicate with the diag
and QMI interfaces exposed by Qualcomm devices. This snapshot is
taken as of msm-3.10 'commit d722f698a54e ("regulator: core: Fix
buffer overflow issue")'.
Also rename the diag_bridge driver to diag_ipc_bridge.c.
Change-Id: Ide503c5bf729a7e41de98b12c89e4edc12af61fe
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for creation of misc device in case the connected
device has 0x05C6 VID and 0x9900 or 0x9901 PID.
0x9900 : WLAN + QMI + DIAG
0x9901 : BT ACL + BT SCO + WLAN + QMI + DIAG
Change-Id: I9f2df97db34c358d341edbf106502eae598b9aed
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Some external hubs cannot enter into test mode if EHSET fixture
is connected to one of its downstream ports. Add support to
enable test modes on any desired downstream port of an external
hub. The port and the test mode can be selected via sysfs nodes.
For example, to send TEST_J packet on downstream port 4 of
external hub 3-1:1.0:
echo 4 > /sys/bus/usb/devices/3-1/3-1\:1.0/test_j_portnum
Change-Id: I145f150bfe8557844cb150cf39fafe03a18bd955
Signed-off-by: Ajay Agarwal <ajaya@codeaurora.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* refs/heads/tmp-d63fdf6
Linux 4.4.120
MIPS: Implement __multi3 for GCC7 MIPS64r6 builds
net: gianfar_ptp: move set_fipers() to spinlock protecting area
sctp: make use of pre-calculated len
xen/gntdev: Fix partial gntdev_mmap() cleanup
xen/gntdev: Fix off-by-one error when unmapping with holes
SolutionEngine771x: fix Ether platform data
mdio-sun4i: Fix a memory leak
xen-netfront: enable device after manual module load
bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine.
can: flex_can: Correct the checking for frame length in flexcan_start_xmit()
mac80211: mesh: drop frames appearing to be from us
drm/ttm: check the return value of kzalloc
e1000: fix disabling already-disabled warning
xfs: quota: check result of register_shrinker()
xfs: quota: fix missed destroy of qi_tree_lock
IB/ipoib: Fix race condition in neigh creation
IB/mlx4: Fix mlx4_ib_alloc_mr error flow
s390/dasd: fix wrongly assigned configuration data
led: core: Fix brightness setting when setting delay_off=0
bnx2x: Improve reliability in case of nested PCI errors
tg3: Enable PHY reset in MTU change path for 5720
tg3: Add workaround to restrict 5762 MRRS to 2048
lib/mpi: Fix umul_ppmm() for MIPS64r6
ARM: dts: ls1021a: fix incorrect clock references
scsi: storvsc: Fix scsi_cmd error assignments in storvsc_handle_error
net: arc_emac: fix arc_emac_rx() error paths
spi: atmel: fixed spin_lock usage inside atmel_spi_remove
drm/nouveau/pci: do a msi rearm on init
sget(): handle failures of register_shrinker()
ARM: 8731/1: Fix csum_partial_copy_from_user() stack mismatch
ipv6: icmp6: Allow icmp messages to be looped back
mtd: nand: gpmi: Fix failure when a erased page has a bitflip at BBM
f2fs: fix a bug caused by NULL extent tree
hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)
ANDROID: keychord: Check for write data size
Revert "binder: add missing binder_unlock()"
Linux 4.4.119
binder: add missing binder_unlock()
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
usb: gadget: f_fs: Process all descriptors during bind
usb: ldusb: add PIDs for new CASSY devices supported by this driver
usb: dwc3: gadget: Set maxpacket size for ep0 IN
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
Add delay-init quirk for Corsair K70 RGB keyboards
arm64: Disable unhandled signal log messages by default
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq()
x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
iio: adis_lib: Initialize trigger before requesting interrupt
iio: buffer: check if a buffer has been set up when poll is called
cfg80211: fix cfg80211_beacon_dup
scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
ip_tunnel: fix preempt warning in ip tunnel creation/updating
ip_tunnel: replace dst_cache with generic implementation
PCI: keystone: Fix interrupt-controller-node lookup
powerpc/64s: Fix RFI flush dependency on HARDLOCKUP_DETECTOR
netfilter: drop outermost socket lock in getsockopt()
ANDROID: sdcardfs: Set num in extension_details during make_item
Conflicts:
drivers/usb/gadget/function/f_fs.c
Change-Id: I594b9686fd64d4b62ebef4452d4f1ccca4f5a77b
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 upstream.
This patch adds support for new CASSY devices to the ldusb driver. The
PIDs are also added to the ignore list in hid-quirks.
Signed-off-by: Karsten Koop <kkoop@ld-didactic.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* refs/heads/tmp-5f6325b
Linux 4.4.112
selftests/x86: Add test_vsyscall
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
x86/alternatives: Fix optimize_nops() checking
sysfs/cpu: Fix typos in vulnerability documentation
x86/cpu: Implement CPU vulnerabilites sysfs functions
sysfs/cpu: Add vulnerability folder
x86/cpu: Merge bugs.c and bugs_64.c
x86/cpufeatures: Add X86_BUG_SPECTRE_V[12]
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/cpufeatures: Add X86_BUG_CPU_INSECURE
x86/cpufeatures: Make CPU bugs sticky
x86/cpu: Factor out application of forced CPU caps
x86/Documentation: Add PTI description
e1000e: Fix e1000_check_for_copper_link_ich8lan return value.
uas: ignore UAS for Norelsys NS1068(X) chips
Bluetooth: Prevent stack info leak from the EFS element.
staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl
usbip: remove kernel addresses from usb device and urb debug msgs
USB: fix usbmon BUG trigger
usb: misc: usb3503: make sure reset is low for at least 100us
USB: serial: cp210x: add new device ID ELV ALC 8xxx
USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ
target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
bpf, array: fix overflow in max_entries and undefined behavior in index_mask
bpf: prevent out-of-bounds speculation
bpf: adjust insn_aux_data when patching insns
bpf: refactor fixup_bpf_calls()
bpf: move fixup_bpf_calls() function
bpf: don't (ab)use instructions to store state
bpf: add bpf_patch_insn_single helper
kaiser: Set _PAGE_NX only if supported
drm/vmwgfx: Potential off by one in vmw_view_add()
KVM: x86: Add memory barrier on vmcs field lookup
x86/microcode/intel: Extend BDW late-loading with a revision check
rbd: set max_segments to USHRT_MAX
crypto: algapi - fix NULL dereference in crypto_remove_spawns()
ipv6: fix possible mem leaks in ipv6_make_skb()
net: stmmac: enable EEE in MII, GMII or RGMII only
sh_eth: fix SH7757 GEther initialization
sh_eth: fix TSU resource handling
RDS: null pointer dereference in rds_atomic_free_op
RDS: Heap OOB write in rds_message_alloc_sgs()
net: core: fix module type in sock_diag_bind
ip6_tunnel: disable dst caching if tunnel is dual-stack
8021q: fix a memory leak for VLAN 0 device
x86/pti/efi: broken conversion from efi to kernel page table
Revert "userfaultfd: selftest: vm: allow to build in vm/ directory"
xhci: Fix ring leak in failure path of xhci_alloc_virt_device()
sysrq: Fix warning in sysrq generated crash.
hwrng: core - sleep interruptible in read
x86/mm/pat, /dev/mem: Remove superfluous error message
cx82310_eth: use skb_cow_head() to deal with cloned skbs
smsc75xx: use skb_cow_head() to deal with cloned skbs
sr9700: use skb_cow_head() to deal with cloned skbs
lan78xx: use skb_cow_head() to deal with cloned skbs
r8152: adjust ALDPS function
r8152: use test_and_clear_bit
r8152: fix the wake event
usb: musb: ux500: Fix NULL pointer dereference at system PM
usbvision fix overflow of interfaces array
locking/mutex: Allow next waiter lockless wakeup
futex: Replace barrier() in unqueue_me() with READ_ONCE()
locks: don't check for race with close when setting OFD lock
zswap: don't param_set_charp while holding spinlock
mm/zswap: use workqueue to destroy pool
mm/page-writeback: fix dirty_ratelimit calculation
mm/compaction: pass only pageblock aligned range to pageblock_pfn_to_page
mm/compaction: fix invalid free_pfn and compact_cached_free_pfn
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
ALSA: aloop: Fix racy hw constraints adjustment
ALSA: aloop: Fix inconsistent format due to incomplete rule
ALSA: aloop: Release cable upon open error path
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
ALSA: pcm: Add missing error checks in OSS emulation plugin builder
ALSA: pcm: Remove incorrect snd_BUG_ON() usages
iommu/arm-smmu-v3: Don't free page table ops twice
x86/acpi: Handle SCI interrupts above legacy space gracefully
x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n
kvm: vmx: Scrub hardware GPRs at VM-exit
net/mac80211/debugfs.c: prevent build failure with CONFIG_UBSAN=y
MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
MIPS: Factor out NT_PRFPREG regset access helpers
MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
IB/srpt: Disable RDMA access by the initiator
can: gs_usb: fix return value of the "set_bittiming" callback
KVM: Fix stack-out-of-bounds read in write_mmio
dm bufio: fix shrinker scans when (nr_to_scan < retain_target)
fscrypt: updates on 4.15-rc4
ANDROID: uid_sys_stats: fix the comment
BACKPORT: optee: fix invalid of_node_put() in optee_driver_init()
BACKPORT: tee: optee: sync with new naming of interrupts
BACKPORT: tee: indicate privileged dev in gen_caps
BACKPORT: tee: optee: interruptible RPC sleep
BACKPORT: tee: optee: add const to tee_driver_ops and tee_desc structures
BACKPORT: tee: tee_shm: Constify dma_buf_ops structures.
BACKPORT: tee: add forward declaration for struct device
BACKPORT: tee: optee: fix uninitialized symbol 'parg'
BACKPORT: tee.txt: standardize document format
BACKPORT: tee: add ARM_SMCCC dependency
BACKPORT: selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
Conflicts:
security/selinux/nlmsgtab.c
Change-Id: I5770a565f39c321f2305f8228e41f822e3cd0625
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit b8626f1dc29d3eee444bfaa92146ec7b291ef41c upstream.
When using a GPIO which is high by default, and initialize the
driver in USB Hub mode, initialization fails with:
[ 111.757794] usb3503 0-0008: SP_ILOCK failed (-5)
The reason seems to be that the chip is not properly reset.
Probe does initialize reset low, however some lines later the
code already set it back high, which is not long enouth.
Make sure reset is asserted for at least 100us by inserting a
delay after initializing the reset pin during probe.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* refs/heads/tmp-7eab308
Linux 4.4.99
misc: panel: properly restore atomic counter on error path
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
target/iscsi: Fix iSCSI task reassignment handling
brcmfmac: remove setting IBSS mode when stopping AP
tipc: fix link attribute propagation bug
security/keys: add CONFIG_KEYS_COMPAT to Kconfig
tcp/dccp: fix other lockdep splats accessing ireq_opt
tcp/dccp: fix lockdep splat in inet_csk_route_req()
tcp/dccp: fix ireq->opt races
ipip: only increase err_count for some certain type icmp in ipip_err
ppp: fix race in ppp device destruction
sctp: reset owner sk for data chunks on out queues when migrating a sock
tun: allow positive return values on dev_get_valid_name() call
ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
net/unix: don't show information about sockets from other namespaces
ipv6: flowlabel: do not leave opt->tot_len with garbage
packet: avoid panic in packet_getsockopt()
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
tun: call dev_get_valid_name() before register_netdevice()
l2tp: check ps->sock before running pppol2tp_session_ioctl()
tcp: fix tcp_mtu_probe() vs highest_sack
tun/tap: sanitize TUNSETSNDBUF input
ALSA: seq: Cancel pending autoload work at unbinding device
Input: ims-psu - check if CDC union descriptor is sane
usb: usbtest: fix NULL pointer dereference
mac80211: don't compare TKIP TX MIC key in reinstall prevention
mac80211: use constant time comparison with keys
mac80211: accept key reinstall without changing anything
FROMLIST: binder: fix proc->files use-after-free
Change-Id: I9aaf4f803a5da1fc983879a214b2fddda7879f41
Signed-off-by: Srinivasarao P <spathi@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit 7c80f9e4a588f1925b07134bb2e3689335f6c6d8 upstream.
If the usbtest driver encounters a device with an IN bulk endpoint but
no OUT bulk endpoint, it will try to dereference a NULL pointer
(out->desc.bEndpointAddress). The problem can be solved by adding a
missing test.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* refs/heads/tmp-9bc4622:
Linux 4.4.70
drivers: char: mem: Check for address space wraparound with mmap()
nfsd: encoders mustn't use unitialized values in error cases
drm/edid: Add 10 bpc quirk for LGD 764 panel in HP zBook 17 G2
PCI: Freeze PME scan before suspending devices
PCI: Fix pci_mmap_fits() for HAVE_PCI_RESOURCE_TO_USER platforms
tracing/kprobes: Enforce kprobes teardown after testing
osf_wait4(): fix infoleak
genirq: Fix chained interrupt data ordering
uwb: fix device quirk on big-endian hosts
metag/uaccess: Check access_ok in strncpy_from_user
metag/uaccess: Fix access_ok()
iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappings
staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
mm/huge_memory.c: respect FOLL_FORCE/FOLL_COW for thp
xc2028: Fix use-after-free bug properly
arm64: documentation: document tagged pointer stack constraints
arm64: uaccess: ensure extension of access_ok() addr
arm64: xchg: hazard against entire exchange variable
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
powerpc/64e: Fix hang when debugging programs with relocated kernel
powerpc/pseries: Fix of_node_put() underflow during DLPAR remove
powerpc/book3s/mce: Move add_taint() later in virtual mode
cx231xx-cards: fix NULL-deref at probe
cx231xx-audio: fix NULL-deref at probe
cx231xx-audio: fix init error path
dvb-frontends/cxd2841er: define symbol_rate_min/max in T/C fe-ops
zr364xx: enforce minimum size when reading header
dib0700: fix NULL-deref at probe
s5p-mfc: Fix unbalanced call to clock management
gspca: konica: add missing endpoint sanity check
ceph: fix recursion between ceph_set_acl() and __ceph_setattr()
iio: proximity: as3935: fix as3935_write
ipx: call ipxitf_put() in ioctl error path
USB: hub: fix non-SS hub-descriptor handling
USB: hub: fix SS hub-descriptor handling
USB: serial: io_ti: fix div-by-zero in set_termios
USB: serial: mct_u232: fix big-endian baud-rate handling
USB: serial: qcserial: add more Lenovo EM74xx device IDs
usb: serial: option: add Telit ME910 support
USB: iowarrior: fix info ioctl on big-endian hosts
usb: musb: tusb6010_omap: Do not reset the other direction's packet size
ttusb2: limit messages to buffer size
mceusb: fix NULL-deref at probe
usbvision: fix NULL-deref at probe
net: irda: irda-usb: fix firmware name on big-endian hosts
usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
usb: host: xhci-plat: propagate return value of platform_get_irq()
sched/fair: Initialize throttle_count for new task-groups lazily
sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
fscrypt: avoid collisions when presenting long encrypted filenames
f2fs: check entire encrypted bigname when finding a dentry
fscrypt: fix context consistency check when key(s) unavailable
net: qmi_wwan: Add SIMCom 7230E
ext4 crypto: fix some error handling
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
USB: serial: ftdi_sio: add Olimex ARM-USB-TINY(H) PIDs
USB: serial: ftdi_sio: fix setting latency for unprivileged users
pid_ns: Fix race between setns'ed fork() and zap_pid_ns_processes()
pid_ns: Sleep in TASK_INTERRUPTIBLE in zap_pid_ns_processes
iio: dac: ad7303: fix channel description
of: fix sparse warning in of_pci_range_parser_one
proc: Fix unbalanced hard link numbers
cdc-acm: fix possible invalid access when processing notification
drm/nouveau/tmr: handle races with hw when updating the next alarm time
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/amdgpu: Make display watermark calculations more accurate
drm/amdgpu: Avoid overflows/divide-by-zero in latency_watermark calculations.
ath9k_htc: fix NULL-deref at probe
ath9k_htc: Add support of AirTies 1eda:2315 AR9271 device
s390/cputime: fix incorrect system time
s390/kdump: Add final note
regulator: tps65023: Fix inverted core enable logic.
KVM: X86: Fix read out-of-bounds vulnerability in kvm pio emulation
KVM: x86: Fix load damaged SSEx MXCSR register
ima: accept previously set IMA_NEW_FILE
mwifiex: pcie: fix cmd_buf use-after-free in remove/reset
rtlwifi: rtl8821ae: setup 8812ae RFE according to device type
md: update slab_cache before releasing new stripes when stripes resizing
dm space map disk: fix some book keeping in the disk space map
dm thin metadata: call precommit before saving the roots
dm bufio: make the parameter "retain_bytes" unsigned long
dm cache metadata: fail operations if fail_io mode has been established
dm bufio: check new buffer allocation watermark every 30 seconds
dm bufio: avoid a possible ABBA deadlock
dm raid: select the Kconfig option CONFIG_MD_RAID0
dm btree: fix for dm_btree_find_lowest_key()
infiniband: call ipv6 route lookup via the stub interface
tpm_crb: check for bad response size
ARM: tegra: paz00: Mark panel regulator as enabled on boot
USB: core: replace %p with %pK
char: lp: fix possible integer overflow in lp_setup()
watchdog: pcwd_usb: fix NULL-deref at probe
USB: ene_usb6250: fix DMA to the stack
usb: misc: legousbtower: Fix memory leak
usb: misc: legousbtower: Fix buffers on stack
ANDROID: uid_sys_stats: defer io stats calulation for dead tasks
ANDROID: AVB: Fix linter errors.
ANDROID: AVB: Fix invalidate_vbmeta_submit().
ANDROID: sdcardfs: Check for NULL in revalidate
Linux 4.4.69
ipmi: Fix kernel panic at ipmi_ssif_thread()
wlcore: Add RX_BA_WIN_SIZE_CHANGE_EVENT event
wlcore: Pass win_size taken from ieee80211_sta to FW
mac80211: RX BA support for sta max_rx_aggregation_subframes
mac80211: pass block ack session timeout to to driver
mac80211: pass RX aggregation window size to driver
Bluetooth: hci_intel: add missing tty-device sanity check
Bluetooth: hci_bcm: add missing tty-device sanity check
Bluetooth: Fix user channel for 32bit userspace on 64bit kernel
tty: pty: Fix ldisc flush after userspace become aware of the data already
serial: omap: suspend device on probe errors
serial: omap: fix runtime-pm handling on unbind
serial: samsung: Use right device for DMA-mapping calls
arm64: KVM: Fix decoding of Rt/Rt2 when trapping AArch32 CP accesses
padata: free correct variable
CIFS: add misssing SFM mapping for doublequote
cifs: fix CIFS_IOC_GET_MNT_INFO oops
CIFS: fix mapping of SFM_SPACE and SFM_PERIOD
SMB3: Work around mount failure when using SMB3 dialect to Macs
Set unicode flag on cifs echo request to avoid Mac error
fs/block_dev: always invalidate cleancache in invalidate_bdev()
ceph: fix memory leak in __ceph_setxattr()
fs/xattr.c: zero out memory copied to userspace in getxattr
ext4: evict inline data when writing to memory map
IB/mlx4: Reduce SRIOV multicast cleanup warning message to debug level
IB/mlx4: Fix ib device initialization error flow
IB/IPoIB: ibX: failed to create mcg debug file
IB/core: Fix sysfs registration error flow
vfio/type1: Remove locked page accounting workqueue
dm era: save spacemap metadata root after the pre-commit
crypto: algif_aead - Require setkey before accept(2)
block: fix blk_integrity_register to use template's interval_exp if not 0
KVM: arm/arm64: fix races in kvm_psci_vcpu_on
KVM: x86: fix user triggerable warning in kvm_apic_accept_events()
um: Fix PTRACE_POKEUSER on x86_64
x86, pmem: Fix cache flushing for iovec write < 8 bytes
selftests/x86/ldt_gdt_32: Work around a glibc sigaction() bug
x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
usb: hub: Do not attempt to autosuspend disconnected devices
usb: hub: Fix error loop seen after hub communication errors
usb: Make sure usb/phy/of gets built-in
usb: misc: add missing continue in switch
staging: comedi: jr3_pci: cope with jiffies wraparound
staging: comedi: jr3_pci: fix possible null pointer dereference
staging: gdm724x: gdm_mux: fix use-after-free on module unload
staging: vt6656: use off stack for out buffer USB transfers.
staging: vt6656: use off stack for in buffer USB transfers.
USB: Proper handling of Race Condition when two USB class drivers try to call init_usb_class simultaneously
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
usb: host: xhci: print correct command ring address
iscsi-target: Set session_fall_back_to_erl0 when forcing reinstatement
target: Convert ACL change queue_depth se_session reference usage
target/fileio: Fix zero-length READ and WRITE handling
target: Fix compare_and_write_callback handling for non GOOD status
xen: adjust early dom0 p2m handling to xen hypervisor behavior
ANDROID: AVB: Only invalidate vbmeta when told to do so.
ANDROID: sdcardfs: Move top to its own struct
ANDROID: lowmemorykiller: account for unevictable pages
ANDROID: usb: gadget: fix NULL pointer issue in mtp_read()
ANDROID: usb: f_mtp: return error code if transfer error in receive_file_work function
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Conflicts:
drivers/usb/gadget/function/f_mtp.c
fs/ext4/page-io.c
net/mac80211/agg-rx.c
Change-Id: Id65e75bf3bcee4114eb5d00730a9ef2444ad58eb
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit dd5ca753fa92fb736b1395db892bd29f78e6d408 upstream.
Drop erroneous le16_to_cpu when returning the USB device speed which is
already in host byte order.
Found using sparse:
warning: cast to restricted __le16
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit 0bd193d62b4270a2a7a09da43ad1034c7ca5b3d3 upstream.
get_version_reply is not freed if function returns with success.
Fixes: 942a48730faf ("usb: misc: legousbtower: Fix buffers on stack")
Reported-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit 942a48730faf149ccbf3e12ac718aee120bb3529 upstream.
Allocate buffers on HEAP instead of STACK for local structures
that are to be received using usb_control_msg().
Signed-off-by: Maksim Salau <maksim.salau@gmail.com>
Tested-by: Alfredo Rafael Vicente Boix <alviboi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit 2c930e3d0aed1505e86e0928d323df5027817740 upstream.
Add missing continue in switch.
Addresses-Coverity-ID: 1248733
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\ \
| |/
|/|
| | |
msm-4.4"
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Not all devices support selective suspend and fail to respond
in dload mode when suspended. Hence don't enable it by default
from driver. User can later enable it using sysfs if needed.
Change-Id: Ifff5891d772011f812e8ae3356bf847dced78bfb
CRs-fixed: 2009286
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
|
| | |\
| | |
| | |
| | | |
dev/msm-4.4-8996au
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Driver currently supports enumeration of only one KSB device
connected at a time. Add changes to allow upto four KSB devices
enumeration and update the dev name with suffix to reflect the
HUB port to which they are connected for user to distinguish
between them.
CRs-fixed: 2009286
Change-Id: Ieee6c4d3d0a2ee35d9848b31cdd7038927fad95c
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
|
| | |\|
| | |
| | |
| | | |
dev/msm-4.4-8996au
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
9025/901D PIDs support multiple interfaces but for ramdump
collection device enumerates with same PID and exposes only one
interface-0. Which otherwise is used for DIAG.
Allow driver to claim this interface and exposes following
misc-dev that can be used by userspace to access device
using sahara protocol: /dev/ks_usb_bridge.
CRs-fixed: 2009286
Change-Id: Ic09dae8f1685f8c7cf5386aed44ae9464620feeb
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
|
| | |\|
| | |
| | |
| | | |
dev/msm-4.4-8996au
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Add snapshot of latest version of ks_bridge driver as of
msm-3.10 commit:
<d85c84a4ff02d55f019b67fa724ad41a4eaa4157> (Merge "qseecom:
check error return value of ion_map_kernel")
CRs-fixed: 2009286
Change-Id: Ia16a12240bc2cfdf5218e1c73d08114aba2a4cc2
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit b0addd3fa6bcd119be9428996d5d4522479ab240 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should a malicious device lack endpoints.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 1dc56c52d2484be09c7398a5207d6b11a4256be9 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer should the probed device lack endpoints.
Note that this driver does not bind to any devices by default.
Fixes: ce21bfe603b3 ("USB: Add LVS Test device driver")
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit f259ca3eed6e4b79ac3d5c5c9fb259fb46e86217 upstream.
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.
Note that the endpoint access that causes the NULL-deref is currently
only used for debugging purposes during probe so the oops only happens
when dynamic debugging is enabled. This means the driver could be
rewritten to continue to accept device with only two endpoints, should
such devices exist.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit de46e56653de7b3b54baa625bd582635008b8d05 upstream.
Make sure to verify that we have the required interrupt-out endpoint for
IOWarrior56 devices to avoid dereferencing a NULL-pointer in write
should a malicious device lack such an endpoint.
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
commit b7321e81fc369abe353cf094d4f0dc2fe11ab95f upstream.
Make sure to check for the required interrupt-in endpoint to avoid
dereferencing a NULL-pointer should a malicious device lack such an
endpoint.
Note that a fairly recent change purported to fix this issue, but added
an insufficient test on the number of endpoints only, a test which can
now be removed.
Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors")
Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 2fae9e5a7babada041e2e161699ade2447a01989 upstream.
This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.
The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.
This bug has existed since 2003. Patch tested by emulated device.
Reported-by: James Patrick-Evans <james@jmp-e.com>
Tested-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 539587511835ea12d8daa444cbed766cf2bc3612 upstream.
In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling
into usb_sg_cancel(). usb_sg_cancel() will do nothing and return
directly if req->status has been set to a non-zero value. This will
cause driver hang whenever transfer time out is triggered.
This patch fixes this issue. It could be backported to stable kernel
with version later than v3.15.
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit cdc77c82a8286b1181b81b6e5ef60c8e83ded7bc upstream.
The current implemenentation restart the sent pattern for each entry in
the sg list. The receiving end expects a continuous pattern, and test
will fail unless scatterilst entries happen to be aligned with the
pattern
Fix this by calculating the pattern byte based on total sent size
instead of just the current sg entry.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: 8b5249019352 ("[PATCH] USB: usbtest: scatterlist OUT data pattern testing")
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit 4ec0ef3a82125efc36173062a50624550a900ae0 upstream.
The iowarrior driver expects at least one valid endpoint. If given
malicious descriptors that specify 0 for the number of endpoints,
it will crash in the probe function. Ensure there is at least
one endpoint on the interface before using it.
The full report of this issue can be found here:
http://seclists.org/bugtraq/2016/Mar/87
Reported-by: Ralf Spenneberg <ralf@spenneberg.net>
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
| |
Use i2c_add_driver as it will add THIS_MODULE for us.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: patches for v4.4 merge window
This pull request is large with a total of 136 non-merge
commits. Because of its size, we will only describe the big things in
broad terms.
Many will be happy to know that dwc3 is now almost twice as fast after
some profiling and speed improvements. Also in dwc3, John Youn from
Synopsys added support for their new DWC USB3.1 IP Core and the HAPS
platform which can be used to validate it.
A series of patches from Robert Baldyga cleaned up uses of
ep->driver_data as a flag for "claimed endpoint" in favor of the new
ep->claimed flag.
Sudip Mukherjee fixed a ton of really old problems on the amd5536udc
driver. That should make a few people happy.
Heikki Krogerus worked on converting dwc3 to the unified device property
interface.
Together with these, there's a ton of non-critical fixes, typos and
stuff like that.
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The bulk queue tests are used to show 'best performance' for bulk
transfer, we are often asked this question by users. The implementation
is the same with iso test, that is queue request at interrupt completion,
so we reuse the iso structures, and rename them as common one.
It's result should be very close to IC simulation, in order
to get that, the device side should also need to prepare enough
queue.
We have got the 'best performance' (IN: 41MB, OUT: 39MB) at i.mx platform
(USB2, ARM Cortex A9, stream mode need to enable) with below command:
Host side:
modprobe usbtest
./testusb -a -t 27 -g 64 -s 16384
./testusb -a -t 28 -g 64 -s 16384
Gadget side:
modprobe g_zero loopdefault=1 qlen=64 buflen=16384
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
With this change, the host and gadget doesn't need to agree with transfer
length for comparing the data, since they doesn't know each other's
transfer size, but know max packet size.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
(Fixed the 'line over 80 characters warning' by Peter Chen)
Tested-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
Using the same data format "buf[j] = (u8)(i + j)" among
write, compare buf, and console output stage.
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The element of urbs array will be initialized at below code
at once.
for (i = 0; i < param->sglen; i++) {
urbs[i] = iso_alloc_urb(udev, pipe, desc,
param->length, offset);
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Allocate the size of urb pointer array according to testusb's
parameter sglen, and limits the length of sglen as MAX_SGLEN
(128 currently).
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
|
| |/
|
|
|
|
|
|
|
| |
Rng reads in chaoskey driver could return the same data under
the certain conditions.
Signed-off-by: Alexander Inyukhin <shurick@sectorb.msk.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
The current code prints all wMaxPacketSize content at endpoint
descriptor, if there is a high speed, high bandwidth endpoint,
it may confuse the users, eg, if there are 3 transactions during
microframe, it will print "wMaxPacket 1400" for packet content.
This commit splits wMaxpacketSize and transaction numbers for
output messages.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
| |
Replace redundant variable use in return statement.
Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB patchset for 4.2-rc1. As is normal these days, the
majority of changes are in the gadget drivers, with a bunch of other
small driver changes.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits)
usb: dwc3: Use ASCII space in Kconfig
usb: chipidea: add work-around for Marvell HSIC PHY startup
usb: chipidea: allow multiple instances to use default ci_default_pdata
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
phy: add Marvell HSIC 28nm PHY
phy: Add Marvell USB 2.0 OTG 28nm PHY
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
USB: ssb: use devm_kzalloc
USB: ssb: fix error handling in ssb_hcd_create_pdev()
usb: isp1760: check for null return from kzalloc
cdc-acm: Add support of ATOL FPrint fiscal printers
usb: chipidea: usbmisc_imx: Remove unneeded semicolon
USB: usbtmc: add device quirk for Rigol DS6104
USB: serial: mos7840: Use setup_timer
phy: twl4030-usb: add ABI documentation
phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
phy: twl4030-usb: make runtime pm more reliable.
drivers:usb:fsl: Fix compilation error for fsl ehci drv
usb: renesas_usbhs: Don't disable the pipe if Control write status stage
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We should not be doing assignments within an if () block
so fix up the code to not do this.
change was created using Coccinelle.
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We should not be doing assignments within an if () block
so fix up the code to not do this.
change was created using Coccinelle.
CC: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We should not be doing assignments within an if () block
so fix up the code to not do this.
change was created using Coccinelle.
CC: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Felipe Balbi <balbi@ti.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
pratyush.anand@st.com email-id doesn't exist anymore as I have left the
company. Replace ST's id with pratyush.anand@gmail.com.
Signed-off-by: Pratyush Anand <pratyush.anand@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Removes Vernier Software & Technology devices from the ldusb
driver and the hid_ignore_list table of the usbhid driver in the
Linux tree. These devices will now be supported via the hidraw
driver.
A user space driver for these devices will be found in the
Go! Software Development Kit from Vernier at
http://www.vernier.com/downloads/software-development-kits/go-sdk/.
These devices are also be supported by the LabQuest2 standalone
interface shown at http://www.vernier.com/products/interfaces/labq2/
and the LoggerPro for Linux software shown at
http://www.vernier.com/downloads/logger-pro-linux/.
Signed-off-by: Dennis O'Brien <dennis.obrien@eqware.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Fix build errors when HW_RANDOM is not enabled:
drivers/built-in.o: In function `chaoskey_disconnect':
chaoskey.c:(.text+0x5f3f00): undefined reference to `hwrng_unregister'
drivers/built-in.o: In function `chaoskey_probe':
chaoskey.c:(.text+0x5f42a6): undefined reference to `hwrng_register'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
> drivers/usb/misc/chaoskey.c: In function 'chaoskey_read':
> >> drivers/usb/misc/chaoskey.c:412:3: error: implicit declaration of function 'copy_to_user'
> >> [-Werror=implicit-function-declaration]
> remain = copy_to_user(buffer, dev->buf + dev->used, this_time);
I was unable to reproduce this locally, but added an explicit
#include <linux/uaccess.h>
which should ensure the definition on all architectures.
> sparse warnings: (new ones prefixed by >>)
>
> >> drivers/usb/misc/chaoskey.c:117:30: sparse: incorrect type in assignment (different base types)
> drivers/usb/misc/chaoskey.c:117:30: expected int [signed] size
> drivers/usb/misc/chaoskey.c:117:30: got restricted __le16 [usertype] wMaxPacketSize
Switched the code to using the USB descriptor accessor functions.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |
|
|
|
|
|
|
|
| |
This is necessary to set REF_SEL appropriately in uses where refclk is
always available.
Signed-off-by: Ben Gamari <ben@smart-cactus.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
