summaryrefslogtreecommitdiff
path: root/drivers/tty/serial (follow)
Commit message (Collapse)AuthorAge
...
* | serial: timberdale: Depend on X86_32Jean Delvare2014-04-16
| | | | | | | | | | | | | | | | | | | | | | As far as I know the Timberdale chip was only used as a companion for Intel Atom E600 series processors. As such, its drivers are only useful on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: st-asc: Fix SysRq char handlingDaniel Thompson2014-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | This driver, like several others, uses the upper bits of the character to track both real and dummy state. Unfortunately it neglects to mask these bits properly when passing the character data around. This means neither break detection nor sysrq character handling work correctly. This patch adds the requires masking and has been tested to confirm that it correctly handles magic sysrq sequences on ST's B2020 board. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "serial: clps711x: Give a chance to perform useful tasks during wait ↵Alexander Shiyan2014-04-16
| | | | | | | | | | | | | | | | | | | | | | | | | | loop" This reverts commit 63e3ad3252695a2b8c01b6f6c225e4537af08b85, since this not works as expected and produce runtime error: BUG: sleeping function called from invalid context at drivers/tty/serial/clps711x.c:379 in_atomic(): 0, irqs_disabled(): 128, pid: 287, name: mount Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial_core: Fix conditional start_tx on ring buffer not emptySeth Bollinger2014-04-16
| | | | | | | | | | | | | | | | | | | | | | If the serial_core ring buffer empties just as the tty layer receives an XOFF, then start_tx will never be called when the tty layer receives an XON as the serial_core ring buffer is empty. This will possibly leave a few bytes trapped in the fifo for drivers that disable the transmitter when flow controlled. Signed-off-by: Seth Bollinger <sethb@digi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: efm32: use $vendor,$device scheme for compatible stringUwe Kleine-König2014-04-16
| | | | | | | | | | | | | | | | | | | | | | Wolfram Sang pointed out that "efm32,$device" is non-standard. So use the common scheme and prefix device with "efm32-". The old compatible string is left in place until arch/arm/boot/dts/efm32* is fixed. Reported-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | serial: omap: free the wakeup settings in removeSanjay Singh Rawat2014-04-16
|/ | | | | Signed-off-by: Sanjay Singh Rawat <sanjay.rawat@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'drivers-3.15' of ↵Linus Torvalds2014-04-05
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
| * Merge tag 'qcom-drivers-for-3.15' of ↵Arnd Bergmann2014-02-25
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/drivers Merge "qcom driver changes for v3.15" from Kumar Gala: We've split Qualcomm MSM support into legacy and multiplatform. These drivers are only relevant on the multiplatform supported SoCs so switch the Kconfig depends to ARCH_QCOM. * tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: gpio: msm: switch Kconfig to ARCH_QCOM depends hwrng: msm: switch Kconfig to ARCH_QCOM depends power: reset: msm - switch Kconfig to ARCH_QCOM depends drm/msm: drop ARCH_MSM Kconfig depend tty: serial: msm: Enable building msm_serial for ARCH_QCOM
| | * tty: serial: msm: Enable building msm_serial for ARCH_QCOMKumar Gala2014-02-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | We've split Qualcomm MSM support into legacy and multiplatform. So add the ability to build the serial driver on the newer ARCH_QCOM multiplatform. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kumar Gala <galak@codeaurora.org>
* | | Merge tag 'cleanup-3.15' of ↵Linus Torvalds2014-04-05
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
| * \ \ Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson2014-02-18
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/cleanup This cleanup series gets rid of <mach/timex.h> for platforms not using ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since 387798b (ARM: initial multiplatform support).) To make this work some code out of arch/arm needed to be adapted. The respective changes got acks by their maintainers to be taken via armsoc (with Andrew Morton substituting for Alessandro Zummo as rtc maintainer). Compared to the previous pull request there was another patch added that fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not squash this fix into the original commit to save him from the need to reverify the series. * tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux: ARM: ixp4xx: fix timer latch calculation ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too ARM: rpc: stop using <mach/timex.h> ARM: ixp4xx: stop using <mach/timex.h> input: ixp4xx-beeper: don't use symbols from <mach/timex.h> ARM: at91: don't use <mach/timex.h> ARM: ep93xx: stop using mach/timex.h ARM: mmp: stop using mach/timex.h ARM: netx: stop using mach/timex.h ARM: sa1100: stop using mach/timex.h clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE rtc: pxa: drop unused #define TIMER_FREQ rtc: at91sam9: include <mach/hardware.h> explicitly ARM/serial: at91: switch atmel serial to use gpiolib Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM/serial: at91: switch atmel serial to use gpiolibLinus Walleij2013-12-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This passes the errata fix using a GPIO to control the RTS pin on one of the AT91 chips to use gpiolib instead of the AT91-specific interfaces. Also remove the reliance on compile-time #defines and the cpu_* check and rely on the platform passing down the proper GPIO pin through platform data. This is a prerequisite for getting rid of the local GPIO implementation in the AT91 platform and move toward multiplatform. The patch also adds device tree support for getting the RTS GPIO pin from the device tree on DT boot paths. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
* | | | Merge tag 'tty-3.15-rc1' of ↵Linus Torvalds2014-04-01
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg KH: "Here's the big tty/serial driver update for 3.15-rc1. Nothing major, a number of serial driver updates and a few tty core fixes as well. All have been in linux-next for a while" * tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty/serial: omap: empty the RX FIFO at the end of half-duplex TX tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX serial: sh-sci: Neaten dev_<level> uses serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF serial: sh-sci: Add more register documentation serial: sh-sci: Remove useless casts serial: sh-sci: Replace printk() by pr_*() serial_core: Avoid NULL pointer dereference in uart_close() serial_core: Get a reference for port->tty in uart_remove_one_port() serial: clps711x: Give a chance to perform useful tasks during wait loop serial_core: Grammar s/ports/port's/ serial_core: Spelling s/contro/control/ serial: efm32: properly namespace location property serial: max310x: Add missing #include <linux/uaccess.h> synclink: fix info leak in ioctl serial: 8250: Clean up the locking for -rt serial: 8250_pci: change BayTrail default uartclk serial: 8250_pci: more BayTrail error-free bauds serial: sh-sci: Add missing call to uart_remove_one_port() in failure path serial_core: Unregister console in uart_remove_one_port() ...
| * | | | tty/serial: omap: empty the RX FIFO at the end of half-duplex TXDimitris Lampridis2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provided that the SER_RS485_RX_DURING_TX flag is not set, empty the RX FIFO to prevent reading back the transmitted data. Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty/serial: omap: fix RX interrupt enable/disable in half-duplex TXDimitris Lampridis2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that serial_omap_stop_rx() also disables RDI (Receiver Data Interrupt), otherwise the interrupt handler will call serial_omap_rdi() to read the new data, resulting in the transmission being echoed back. When the half-duplex transmission is complete, in order to reverse the effects of serial_omap_stop_rx(), we should re-enable: * the RX interrupts _without_ overwriting up->ier * the UART_LSR_DR bit of the up->port.read_status_mask Signed-off-by: Dimitris Lampridis <dlampridis@logikonlabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Neaten dev_<level> usesJoe Perches2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing newlines and coalesce formats. Realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFFGeert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Add more register documentationGeert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Remove useless castsGeert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Replace printk() by pr_*()Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make banner const while we're at it Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial_core: Avoid NULL pointer dereference in uart_close()Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When unbinding a serial driver that's being used as a serial console, the kernel may crash with a NULL pointer dereference in a uart_*() function called from uart_close () (e.g. uart_flush_buffer() or uart_chars_in_buffer()). To fix this, let uart_close() check for port->count == 0. If this is the case, bail out early. Else tty_port_close_start() will make the port counts inconsistent, printing out warnings like tty_port_close_start: tty->count = 1 port count = 0. and tty_port_close_start: count = -1 and once uport == NULL, it will also crash. Also fix the related crash in pr_debug() by checking for a non-NULL uport first. Detailed description: On driver unbind, uart_remove_one_port() is called. Basically it; - marks the port dead, - calls tty_vhangup(), - sets state->uart_port = NULL. What will happen depends on whether the port is just in use by e.g. getty, or was also opened as a console. A. If the tty was not opened as a console: - tty_vhangup() will (in __tty_hangup()): - mark all file descriptors for this tty hung up by pointing them to hung_up_tty_fops, - call uart_hangup(), which sets port->count to 0. - A subsequent uart_open() (this may be through /dev/ttyS*, or through /dev/console if this is a serial console) will fail with -ENXIO as the port was marked dead, - uart_close() after the failed uart_open() will return early, as tty_hung_up_p() (called from tty_port_close_start()) will notice it was hung up. B. If the tty was also opened as a console: - tty_vhangup() will (in __tty_hangup()): - mark non-console file descriptors for this tty hung up by pointing them to hung_up_tty_fops, - NOT call uart_hangup(), but instead call uart_close() for every non-console file descriptor, so port->count will still have a non-zero value afterwards. - A subsequent uart_open() will fail with -ENXIO as the port was marked dead, - uart_close() after the failed uart_open() starts to misbehave: - tty_hung_up_p() will not notice it was hung up, - As port->count is non-zero, tty_port_close_start() will decrease port->count, making the tty and port counts inconsistent. Later, warnings like these will be printed: tty_port_close_start: tty->count = 1 port count = 0. and tty_port_close_start: count = -1 - If all of this happens after state->uart_port was set to zero, a NULL pointer dereference will happen. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial_core: Get a reference for port->tty in uart_remove_one_port()Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Suggested-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: clps711x: Give a chance to perform useful tasks during wait loopAlexander Shiyan2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds cond_sched() calls during wait loop to perform other tasks. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial_core: Grammar s/ports/port's/Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial_core: Spelling s/contro/control/Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: efm32: properly namespace location propertyUwe Kleine-König2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While reviewing an i2c driver for efm32 that needs a similar property Wolfram Sang pointed out that "location" is a too generic name for something that is efm32 specific. So add an appropriate namespace and fall back to the generic name in case of failure. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: max310x: Add missing #include <linux/uaccess.h>Geert Uytterhoeven2014-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cris allmodconfig: drivers/tty/serial/max310x.c: In function 'max310x_ioctl': drivers/tty/serial/max310x.c:885:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] drivers/tty/serial/max310x.c:916:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250: Clean up the locking for -rtIngo Molnar2014-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In -RT the spin_lock_irqsave() does not spin but sleep if the lock is taken. Before that, local_irq_save() is invoked which disables interrupts even on -RT. Therefore local_irq_save() + spin_lock() does not work. In the ->sysrq and oops_in_progress case it is save to trylock the lock i.e. this is what we do now anyway except for ->sysrq where we assume that the lock is already taken. The spin_lock_irqsave() grabs the lock and disables the interrupts on vanilla (the same behavior) and on -RT it won't disable interrupts. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bigeasy: add a patch description] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250_pci: change BayTrail default uartclkAaron Sierra2014-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Intel BayTrail HSUART power-on default reference clock is 44.2368 MHz, but 73.728 MHz provides 0% error for additional "conventional" baud rates above 460800 (e.g. 576000, 921600, and 1152000). Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: 8250_pci: more BayTrail error-free baudsAaron Sierra2014-03-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the following additional baud rates with 0% error: 500000, 1500000, 2500000, 3500000 Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sh-sci: Add missing call to uart_remove_one_port() in failure pathGeert Uytterhoeven2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If cpufreq_register_notifier() fails, we have to remove the port added by sci_probe_single(), which is not done by sci_cleanup_single(). Else the serial port stays active from the point of view of the serial subsystem, and it may crash when userspace getty is started, or when the loadable driver module is unloaded. This was introduced by commit 6dae14216c85eea13db7b12c469475c5d30e5499 ("serial: sh-sci: Fix probe error paths"). Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial_core: Unregister console in uart_remove_one_port()Geert Uytterhoeven2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the serial port being removed is used as a console, it must also be unregistered from the console subsystem using unregister_console(). uart_ops.release_port() will release resources (e.g. iounmap() the serial port registers), causing a crash on subsequent kernel output if the console is still registered. Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty/serial: at91: remove unused open/close hooksRichard Genoud2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 95e629b761ce36996d1befe2824d5346b5a220b9 removed the use of board specific hooks in serial_at91.h, so now, the open/close hook are just dead code. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty/serial: at91: use dev_err instead of printkRichard Genoud2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For better consistency. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: imx: Remove init() and exit() platform callbacksAlexander Shiyan2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: imx: Use dev_name() for request_irq() to distinguish UARTsAlexander Shiyan2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: imx: Use devm_ioremap_resource()Alexander Shiyan2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use devm_ioremap_resource() in order to make the code simpler and it gives proper codes on errors. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: serial: bcm63xx_uart: add support for DT probingFlorian Fainelli2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a matching table for the the bcm63xx_uart driver on the compatible string "brcm,bcm6345-uart" which covers all BCM63xx implementations and reflects the fact that this block was first introduced with the BCM6345 SoC. Also make sure that we convert the id based on the uart aliases provided by the relevant Device Tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: serial: bcm63xx_uart: define UART_REG_SIZE constantFlorian Fainelli2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bcm63xx_uart driver uses RSET_UART_SIZE which is a constant defined for MIPS-based BCM63xx platforms, pull this constant value from the MIPS-specific header and put it in include/linux/serial_bcm63xx.h to make the driver platform agnostic. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: serial: bcm63xx_uart: include linux/io.hFlorian Fainelli2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include linux/io.h which provides the definition for __raw_{readl,writel}, this is not necessary on MIPS since there is an implicit inclusion, but it is on ARM for instance. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | drivers/tty/serial: deal with 8250_core.c uninitialized warning for goodPaul Gortmaker2014-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every couple of months, someone sends a patch to fix: drivers/tty/serial/8250/8250_core.c: In function 'serial_unlink_irq_chain': drivers/tty/serial/8250/8250_core.c:1712:2: warning: 'i' may be used uninitialized in this function [-Wuninitialized] and they in turn get a NACK for their efforts, and are told that their compiler is broken. This has been going on since at least the year 2008: https://lkml.org/lkml/2008/11/24/433 Lets add a comment, so that subsequent patches don't get as far as the maintainers or the mailing lists. Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: fsl_lpuart: add DMA supportYuan Yao2014-02-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add dma support for lpuart. This function depend on DMA driver. You can turn on it by write both the dmas and dma-name properties in dts node. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: max310x: Fix sparse warningsAlexander Shiyan2014-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sparse warnings: (new ones prefixed by >>) >> drivers/tty/serial/max310x.c:906:45: sparse: incorrect type in argument 2 (different address spaces) drivers/tty/serial/max310x.c:906:45: expected void const [noderef] <asn:1>*from drivers/tty/serial/max310x.c:906:45: got struct serial_rs485 *<noident> >> drivers/tty/serial/max310x.c:938:35: sparse: incorrect type in argument 1 (different address spaces) drivers/tty/serial/max310x.c:938:35: expected void [noderef] <asn:1>*to drivers/tty/serial/max310x.c:938:35: got struct serial_rs485 *<noident> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: serial: crisv10: Drop remaining code for CRISv10 CPU simulatorPaul Bolle2014-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Kconfig symbol SVINTO_SIM got dropped in commit e269a869417c ("Drop code for CRISv10 CPU simulator"). Now drop the remaining code for that simulator. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: max310x: Fix build errorAlexander Shiyan2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a temporary solution to fix following issue: config: make ARCH=alpha allyesconfig All error/warnings: drivers/tty/serial/max310x.c: In function 'max310x_ioctl': >> drivers/tty/serial/max310x.c:905:7: error: 'TIOCSRS485' undeclared (first use in this function) drivers/tty/serial/max310x.c:905:7: note: each undeclared identifier is reported only once for each function it appears in >> drivers/tty/serial/max310x.c:906:3: error: implicit declaration of function 'copy_from_user' [-Werror=implicit-function-declaration] >> drivers/tty/serial/max310x.c:929:7: error: 'TIOCGRS485' undeclared (first use in this function) >> drivers/tty/serial/max310x.c:938:3: error: implicit declaration of function 'copy_to_user' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "serial: max310x: Fix build error"Greg Kroah-Hartman2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e3c6ea9b1b81b87de96c01d5d37764009d546636 as it didn't help anything, and caused more problems than expected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: sirf: move to use generic dma dt-binding to get dma channelsQipan Li2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | instead of using sirf specific dma channel property like "sirf,uart-dma-rx-channel" and "sirf,uart-dma-tx-channel", here we move to use generic dma dt-binding to get the channel like: - sirf,uart-dma-rx-channel = <21>; - sirf,uart-dma-tx-channel = <2>; + dmas = <&dmac1 5>, <&dmac0 2>; + dma-names = "rx", "tx"; and we move dma_request_channel() to dma_request_slave_channel(), we don't need to call sirfsoc dma filter function sirfsoc_dma_filter_id() again. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: pl011: Move uart_register_driver call to device probeTushar Behera2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with same default major/minor numbers are included in the kernel. A typical case is observed with amba-pl011 and samsung-uart drivers. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: samsung: Move uart_register_driver call to device probeTushar Behera2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uart_register_driver call binds the driver to a specific device node through tty_register_driver call. This should typically happen during device probe call. In a multiplatform scenario, it is possible that multiple serial drivers are part of the kernel. Currently the driver registration fails if multiple serial drivers with same default major/minor numbers are included in the kernel. A typical case is observed with amba-pl011 and samsung-uart drivers. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | serial: max310x: Fix build warningAlexander Shiyan2014-02-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | config: x86_64-randconfig-x006 (attached as .config) All warnings: drivers/tty/serial/max310x.c: In function 'max310x_probe': >> drivers/tty/serial/max310x.c:1240:1: warning: label 'out_uart' defined but not used [-Wunused-label] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-04 08:28:40 +0000