| Commit message (Collapse) | Author | Age |
|---|
| ... | |
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 6c730080e663b1d629f8aa89348291fbcdc46cd9 ]
The notifier calls were thrown in as a last-minute fix for an
imagined "this device could be part of a bridge" problem. That
revealed a certain lack of locking. Not to mention testing...
Avoid this splat:
RTNL: assertion failed at net/core/dev.c (1639)
CPU: 0 PID: 4293 Comm: bash Not tainted 4.4.0-rc3+ #358
Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011
0000000000000000 ffff8800ad253d60 ffffffff8122f7cf ffff8800ad253d98
ffff8800ad253d88 ffffffff813833ab 0000000000000002 ffff880230f48560
ffff880230a12900 ffff8800ad253da0 ffffffff813833da 0000000000000002
Call Trace:
[<ffffffff8122f7cf>] dump_stack+0x4b/0x63
[<ffffffff813833ab>] call_netdevice_notifiers_info+0x3d/0x59
[<ffffffff813833da>] call_netdevice_notifiers+0x13/0x15
[<ffffffffa09be227>] raw_ip_store+0x81/0x193 [qmi_wwan]
[<ffffffff8131e149>] dev_attr_store+0x20/0x22
[<ffffffff811d858b>] sysfs_kf_write+0x49/0x50
[<ffffffff811d8027>] kernfs_fop_write+0x10a/0x151
[<ffffffff8117249a>] __vfs_write+0x26/0xa5
[<ffffffff81085ed4>] ? percpu_down_read+0x53/0x7f
[<ffffffff81174c9e>] ? __sb_start_write+0x5f/0xb0
[<ffffffff81174c9e>] ? __sb_start_write+0x5f/0xb0
[<ffffffff81172c37>] vfs_write+0xa3/0xe7
[<ffffffff811734ad>] SyS_write+0x50/0x7e
[<ffffffff8145c517>] entry_SYSCALL_64_fastpath+0x12/0x6f
Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 32f7adf633b9f99ad5089901bc7ebff57704aaa9 ]
QMI wwan devices have traditionally emulated ethernet devices
by default. But they have always had the capability of operating
without any L2 header at all, transmitting and receiving "raw"
IP packets over the USB link. This firmware feature used to be
configurable through the QMI management protocol.
Traditionally there was no way to verify the firmware mode
without attempting to change it. And the firmware would often
disallow changes anyway, i.e. due to a session already being
established. In some cases, this could be a hidden firmware
internal session, completely outside host control. For these
reasons, sticking with the "well known" default mode was safest.
But newer generations of QMI hardware and firmware have moved
towards defaulting to "raw IP" mode instead, followed by an
increasing number of bugs in the already buggy "802.3" firmware
implementation. At the same time, the QMI management protocol
gained the ability to detect the current mode. This has enabled
the userspace QMI management application to verify the current
firmware mode without trying to modify it.
Following this development, the latest QMI hardware and firmware
(the MDM9x30 generation) has dropped support for "802.3" mode
entirely. Support for "raw IP" framing in the driver is therefore
necessary for these devices, and to a certain degree to work
around problems with the previous generation,
This patch adds support for "raw IP" framing for QMI devices,
changing the netdev from an ethernet device to an ARPHRD_NONE
p-t-p device when "raw IP" framing is enabled.
The firmware setup is fully delegated to the QMI userspace
management application, through simple tunneling of the QMI
protocol. The driver will therefore not know which mode has been
"negotiated" between firmware and userspace. Allowing userspace
to inform the driver of the result through a sysfs switch is
considered a better alternative than to change the well established
clean delegation of firmware management to userspace.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 93725149794d3d418cf1eddcae60c7b536c5faa1 ]
MDM9x30 based modems appear to go into a deeper sleep when
suspended without "Remote Wakeup" enabled. The QMI interface
will not respond unless a "set DTR" control request is sent
on resume. The effect is similar to a QMI_CTL SYNC request,
resetting (some of) the firmware state.
We allow userspace sessions to span multiple character device
open/close sequences. This means that userspace can depend
on firmware state while both the netdev and the character
device are closed. We have disabled "needs_remote_wakeup" at
this point to allow devices without remote wakeup support to
be auto-suspended.
To make sure the MDM9x30 keeps firmware state, we need to
keep "needs_remote_wakeup" always set. We also need to
issue a "set DTR" request to enable the QMI interface.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 556699341efa98243e08e34401b3f601da91f5a3 ]
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit dbbfa96ad920c50d58bcaefa57f5f33ceef9d00e ]
If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware
command may return zero dir entries. Return error in such case to
avoid zero length dma buffer request.
Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.235
net: Fix potential wrong skb->protocol in skb_vlan_untag()
tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
ipvlan: fix device features
bonding: show saner speed for broadcast mode
bonding: fix a potential double-unregister
powerpc/pseries: Do not initiate shutdown when system is running on UPS
ALSA: pci: delete repeated words in comments
ASoC: tegra: Fix reference count leaks.
media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq()
scsi: target: tcmu: Fix crash on ARM during cmd completion
drm/amdkfd: Fix reference count leaks.
drm/radeon: fix multiple reference count leak
drm/amdgpu: fix ref count leak in amdgpu_driver_open_kms
drm/amd/display: fix ref count leak in amdgpu_drm_ioctl
drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config
drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync fails
scsi: lpfc: Fix shost refcount mismatch when deleting vport
selftests/powerpc: Purge extra count_pmc() calls of ebb selftests
PCI: Fix pci_create_slot() reference count leak
rtlwifi: rtl8192cu: Prevent leaking urb
mips/vdso: Fix resource leaks in genvdso.c
drm/nouveau/drm/noveau: fix reference count leak in nouveau_fbcon_open
drm/nouveau: Fix reference count leak in nouveau_connector_detect
locking/lockdep: Fix overflow in presentation of average lock-time
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
ceph: fix potential mdsc use-after-free crash
scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()
EDAC/ie31200: Fallback if host bridge device is already initialized
media: davinci: vpif_capture: fix potential double free
powerpc/spufs: add CONFIG_COREDUMP dependency
USB: sisusbvga: Fix a potential UB casued by left shifting a negative value
Revert "ath10k: fix DMA related firmware crashes on multiple devices"
i2c: rcar: in slave mode, clear NACK earlier
jbd2: make sure jh have b_transaction set in refile/unfile_buffer
jbd2: abort journal if free a async write error metadata buffer
s390/cio: add cond_resched() in the slow_eval_known_fn() loop
scsi: ufs: Fix possible infinite loop in ufshcd_hold
net: gianfar: Add of_node_put() before goto statement
fbcon: prevent user font height or width change from causing potential out-of-bounds access
USB: lvtest: return proper error code in probe
vt: defer kfree() of vc_screenbuf in vc_do_resize()
vt_ioctl: change VT_RESIZEX ioctl to check for error return from vc_resize()
serial: samsung: Removes the IRQ not found warning
serial: pl011: Don't leak amba_ports entry on driver register error
serial: 8250: change lock order in serial8250_do_startup()
writeback: Protect inode->i_io_list with inode->i_lock
writeback: Avoid skipping inode writeback
writeback: Fix sync livelock due to b_dirty_time processing
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.
xhci: Do warm-reset when both CAS and XDEV_RESUME are set
PM: sleep: core: Fix the handling of pending runtime resume requests
device property: Fix the secondary firmware node handling in set_primary_fwnode()
USB: yurex: Fix bad gfp argument
usb: uas: Add quirk for PNY Pro Elite
USB: quirks: Add no-lpm quirk for another Raydium touchscreen
USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge
usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()
usb: storage: Add unusual_uas entry for Sony PSZ drives
btrfs: check the right error variable in btrfs_del_dir_entries_in_log
HID: hiddev: Fix slab-out-of-bounds write in hiddev_ioctl_usage()
ALSA: usb-audio: Update documentation comment for MS2109 quirk
Linux 4.4.235
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic94d552561168bb9f44bc1350806425cbc35f743
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]
Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.
Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ]
This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e.
PCIe hung issue was observed on multiple platforms. The issue was reproduced
when DUT was configured as AP and associated with 50+ STAs.
For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size
of the RD/WR access to the HOST MEM.
0 - No split , RAW read/write transfer size from MAC is put out on bus
as burst length
1 - Split at 256 byte boundary
2,3 - Reserved
With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when
issue happened. It broke PCIe spec and caused PCIe stuck. So revert
the default value from 0 to 1.
Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047
QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044
Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040
Signed-off-by: Zhi Chen <zhichen@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ]
If usb_submit_urb fails the allocated urb should be unanchored and
released.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ]
When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.
If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.
Workaround this special case by checking reg_state.
Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ]
Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.
Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.
Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ]
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().
--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#
--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#
Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| |\| |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
https://android.googlesource.com/kernel/common into lineage-17.1-caf-msm8998
This brings LA.UM.8.4.r1-05900-8x98.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
59f04f292e871 ANDROID: fix a bug in quota2
Conflicts:
Makefile
fs/ext4/inode.c
fs/f2fs/dir.c
Change-Id: Ic71b44a02908cf633d96114f0ff745cf1e1186de
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.233
xfs: don't call xfs_da_shrink_inode with NULL bp
net: phy: mdio-bcm-unimac: fix potential NULL dereference in unimac_mdio_probe()
media: rc: prevent memory leak in cx23888_ir_probe
ath9k_htc: release allocated buffer if timed out
ath9k: release allocated buffer if timed out
nfs: Move call to security_inode_listsecurity into nfs_listxattr
PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
drm: hold gem reference until object is no longer accessed
f2fs: check memory boundary by insane namelen
f2fs: check if file namelen exceeds max value
ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/x25: Fix x25_neigh refcnt leak when x25 disconnect
net/x25: Fix null-ptr-deref in x25_disconnect
sh: Fix validation of system call number
net: lan78xx: add missing endpoint sanity check
net: lan78xx: fix transfer-buffer memory leak
mlxsw: core: Increase scope of RCU read-side critical section
mac80211: mesh: Free ie data when leaving mesh
nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frame
net: ethernet: ravb: exit if re-initialization fails in tx timeout
Revert "i2c: cadence: Fix the hold bit setting"
xen-netfront: fix potential deadlock in xennet_remove()
x86/i8259: Use printk_deferred() to prevent deadlock
random32: update the net random state on interrupt and activity
ARM: percpu.h: fix build error
random: fix circular include dependency on arm64 after addition of percpu.h
random32: remove net_rand_state from the latent entropy gcc plugin
random32: move the pseudo-random 32-bit definitions to prandom.h
ext4: fix direct I/O read error
USB: serial: qcserial: add EM7305 QDL product ID
ALSA: seq: oss: Serialize ioctls
Bluetooth: Fix slab-out-of-bounds read in hci_extended_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_evt()
Bluetooth: Prevent out-of-bounds read in hci_inquiry_result_with_rssi_evt()
vgacon: Fix for missing check in scrollback handling
mtd: properly check all write ioctls for permissions
net/9p: validate fds in p9_fd_open
drm/nouveau/fbcon: fix module unload when fbcon init has failed for some reason
cfg80211: check vendor command doit pointer before use
igb: reinit_locked() should be called with rtnl_lock
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
tools lib traceevent: Fix memory leak in process_dynamic_array_len
binder: Prevent context manager from incrementing ref 0
ipv4: Silence suspicious RCU usage warning
ipv6: fix memory leaks on IPV6_ADDRFORM path
Revert "vxlan: fix tos value before xmit"
net: lan78xx: replace bogus endpoint lookup
usb: hso: check for return value in hso_serial_common_create()
vxlan: Ensure FDB dump is performed under RCU
Smack: fix use-after-free in smk_write_relabel_self()
tracepoint: Mark __tracepoint_string's __used
udp: drop corrupt packets earlier to avoid data corruption
gpio: fix oops resulting from calling of_get_named_gpio(NULL, ...)
EDAC: Fix reference count leaks
m68k: mac: Don't send IOP message until channel is idle
m68k: mac: Fix IOP status/control register writes
ARM: at91: pm: add missing put_device() call in at91_pm_sram_init()
ARM: socfpga: PM: add missing put_device() call in socfpga_setup_ocram_self_refresh()
drm/tilcdc: fix leak & null ref in panel_connector_get_modes
Bluetooth: add a mutex lock to avoid UAF in do_enale_set
fs/btrfs: Add cond_resched() for try_release_extent_mapping() stalls
drm/radeon: Fix reference count leaks caused by pm_runtime_get_sync
video: fbdev: neofb: fix memory leak in neo_scan_monitor()
drm/nouveau: fix multiple instances of reference count leaks
drm/debugfs: fix plain echo to connector "force" attribute
mm/mmap.c: Add cond_resched() for exit_mmap() CPU stalls
brcmfmac: To fix Bss Info flag definition Bug
iwlegacy: Check the return value of pcie_capability_read_*()
usb: gadget: net2280: fix memory leak on probe error handling paths
bdc: Fix bug causing crash after multiple disconnects
dyndbg: fix a BUG_ON in ddebug_describe_flags
bcache: fix super block seq numbers comparision in register_cache_set()
ACPICA: Do not increment operation_region reference counts for field units
agp/intel: Fix a memory leak on module initialisation failure
video: fbdev: sm712fb: fix an issue about iounmap for a wrong address
console: newport_con: fix an issue about leak related system resources
iio: improve IIO_CONCENTRATION channel type description
leds: lm355x: avoid enum conversion warning
media: omap3isp: Add missed v4l2_ctrl_handler_free() for preview_init_entities()
scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()
cxl: Fix kobject memleak
drm/radeon: fix array out-of-bounds read and write issues
scsi: powertec: Fix different dev_id between request_irq() and free_irq()
scsi: eesox: Fix different dev_id between request_irq() and free_irq()
media: firewire: Using uninitialized values in node_probe()
media: exynos4-is: Add missed check for pinctrl_lookup_state()
drm: panel: simple: Fix bpc for LG LB070WV8 panel
mwifiex: Prevent memory corruption handling keys
powerpc/vdso: Fix vdso cpu truncation
PCI/ASPM: Add missing newline in sysfs 'policy'
usb: dwc2: Fix error path in gadget registration
scsi: mesh: Fix panic after host or bus reset
Smack: fix another vsscanf out of bounds
Smack: prevent underflow in smk_set_cipso()
power: supply: check if calc_soc succeeded in pm860x_init_battery
s390/qeth: don't process empty bridge port events
wl1251: fix always return 0 error
net: spider_net: Fix the size used in a 'dma_free_coherent()' call
dlm: Fix kobject memleak
pinctrl-single: fix pcs_parse_pinconf() return value
drivers/net/wan/lapbether: Added needed_headroom and a skb->len check
net/nfc/rawsock.c: add CAP_NET_RAW check.
net: Set fput_needed iff FDPUT_FPUT is set
ALSA: usb-audio: Creative USB X-Fi Pro SB1095 volume knob support
ALSA: usb-audio: fix overeager device match for MacroSilicon MS2109
ALSA: usb-audio: add quirk for Pioneer DDJ-RB
crypto: qat - fix double free in qat_uclo_create_batch_init_list
fs/minix: check return value of sb_getblk()
fs/minix: don't allow getting deleted inodes
fs/minix: reject too-large maximum file size
ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109
9p: Fix memory leak in v9fs_mount
parisc: mask out enable and reserved bits from sba imask
ARM: 8992/1: Fix unwind_frame for clang-built kernels
xen/balloon: fix accounting in alloc_xenballooned_pages error path
xen/balloon: make the balloon wait interruptible
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
btrfs: only search for left_info if there is no right_info in try_merge_free_space
btrfs: fix memory leaks after failure to lookup checksums during inode logging
powerpc: Fix circular dependency between percpu.h and mmu.h
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
bcache: allocate meta data pages as compound pages
mac80211: fix misplaced while instead of if
MIPS: CPU#0 is not hotpluggable
ext2: fix missing percpu_counter_inc
ocfs2: change slot number type s16 to u16
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
pseries: Fix 64 bit logical memory block panic
USB: serial: ftdi_sio: make process-packet buffer unsigned
USB: serial: ftdi_sio: clean up receive processing
iommu/omap: Check for failure of a call to omap_iommu_dump_ctx
iommu/vt-d: Enforce PASID devTLB field mask
i2c: rcar: slave: only send STOP event when we have been addressed
clk: clk-atlas6: fix return value check in atlas6_clk_init()
Input: sentelic - fix error return when fsp_reg_write fails
drm/vmwgfx: Fix two list_for_each loop exit tests
nfs: Fix getxattr kernel panic and memory overflow
fs/ufs: avoid potential u32 multiplication overflow
mfd: dln2: Run event handler loop under spinlock
ALSA: echoaudio: Fix potential Oops in snd_echo_resume()
sh: landisk: Add missing initialization of sh_io_port_base
ipv6: check skb->protocol before lookup for nexthop
Linux 4.4.233
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iec7dcf69361bcc247996f3de2e20ba64ed0ce3a8
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 592d751c1e174df5ff219946908b005eb48934b3 upstream.
If we don't have a hardware multicast filter available then instead of
silently failing to listen for the requested ethernet broadcast
addresses fall back to receiving all multicast packets, in a similar
fashion to other drivers with no multicast filter.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit df43dd526e6609769ae513a81443c7aa727c8ca3 upstream.
The IPQ806x does not appear to have a functional multicast ethernet
address filter. This was observed as a failure to correctly receive IPv6
packets on a LAN to the all stations address. Checking the vendor driver
shows that it does not attempt to enable the multicast filter and
instead falls back to receiving all multicast packets, internally
setting ALLMULTI.
Use the new fallback support in the dwmac1000 driver to correctly
achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6
functionality on an RB3011 router.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit c7ca03c216acb14466a713fedf1b9f2c24994ef2 ]
1. Added a skb->len check
This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.
2. Changed to use needed_headroom instead of hard_header_len to request
necessary headroom to be allocated
In net/packet/af_packet.c, the function packet_snd first reserves a
headroom of length (dev->hard_header_len + dev->needed_headroom).
Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
which calls dev->header_ops->create, to create the link layer header.
If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
length (dev->hard_header_len), and assumes the user to provide the
appropriate link layer header.
So according to the logic of af_packet.c, dev->hard_header_len should
be the length of the header that would be created by
dev->header_ops->create.
However, this driver doesn't provide dev->header_ops, so logically
dev->hard_header_len should be 0.
So we should use dev->needed_headroom instead of dev->hard_header_len
to request necessary headroom to be allocated.
This change fixes kernel panic when this driver is used with AF_PACKET
SOCK_RAW sockets.
Call stack when panic:
[ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20
put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0
dev:veth0
...
[ 168.399255] Call Trace:
[ 168.399259] skb_push.cold+0x14/0x24
[ 168.399262] eth_header+0x2b/0xc0
[ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether]
[ 168.399275] lapb_data_transmit+0x22/0x2c [lapb]
[ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb]
[ 168.399279] lapb_kick+0xe3/0x1c0 [lapb]
[ 168.399281] lapb_data_request+0x76/0xc0 [lapb]
[ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether]
[ 168.399286] dev_hard_start_xmit+0x91/0x1f0
[ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100
[ 168.399291] __dev_queue_xmit+0x721/0x8e0
[ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110
[ 168.399297] dev_queue_xmit+0x10/0x20
[ 168.399298] packet_sendmsg+0xbf0/0x19b0
......
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 36f28f7687a9ce665479cce5d64ce7afaa9e77ae ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()', in
'spider_net_init_chain()'.
Fixes: d4ed8f8d1fb7 ("Spidernet DMA coalescing")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 20e6421344b5bc2f97b8e2db47b6994368417904 ]
wl1251_event_ps_report() should not always return 0 because
wl1251_ps_set_mode() may fail. Change it to return 'ret'.
Fixes: f7ad1eed4d4b ("wl1251: retry power save entry")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit e18696786548244914f36ec3c46ac99c53df99c3 ]
The length of the key comes from the network and it's a 16 bit number. It
needs to be capped to prevent a buffer overflow.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ]
On failure pcie_capability_read_dword() sets it's last parameter, val
to 0. However, with Patch 14/14, it is possible that val is set to ~0 on
failure. This would introduce a bug because (x & x) == (~0 & x).
This bug can be avoided without changing the function's behaviour if the
return value of pcie_capability_read_dword is checked to confirm success.
Check the return value of pcie_capability_read_dword() to ensure success.
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ]
Bss info flag definition need to be fixed from 0x2 to 0x4
This flag is for rssi info received on channel.
All Firmware branches defined as 0x4 and this is bug in brcmfmac.
Signed-off-by: Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit b5141915b5aec3b29a63db869229e3741ebce258 ]
The commit cited below removed the RCU read-side critical section from
rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked
without RCU protection.
This results in the following warning [1] in the VXLAN driver, which
relied on the callback being invoked from an RCU read-side critical
section.
Fix this by calling rcu_read_lock() in the VXLAN driver, as already done
in the bridge driver.
[1]
WARNING: suspicious RCU usage
5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted
-----------------------------
drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by bridge/166:
#0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090
stack backtrace:
CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
dump_stack+0x100/0x184
lockdep_rcu_suspicious+0x153/0x15d
vxlan_fdb_dump+0x51e/0x6d0
rtnl_fdb_dump+0x4dc/0xad0
netlink_dump+0x540/0x1090
__netlink_dump_start+0x695/0x950
rtnetlink_rcv_msg+0x802/0xbd0
netlink_rcv_skb+0x17a/0x480
rtnetlink_rcv+0x22/0x30
netlink_unicast+0x5ae/0x890
netlink_sendmsg+0x98a/0xf40
__sys_sendto+0x279/0x3b0
__x64_sys_sendto+0xe6/0x1a0
do_syscall_64+0x54/0xa0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fe14fa2ade0
Code: Bad RIP value.
RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0
RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003
RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit e911e99a0770f760377c263bc7bac1b1593c6147 ]
in case of an error tty_register_device_attr() returns ERR_PTR(),
add IS_ERR() check
Reported-and-tested-by: syzbot+67b2bd0e34f952d0321e@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=67b2bd0e34f952d0321e
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit ea060b352654a8de1e070140d25fe1b7e4d50310 ]
Drop the bogus endpoint-lookup helper which could end up accepting
interfaces based on endpoints belonging to unrelated altsettings.
Note that the returned bulk pipes and interrupt endpoint descriptor
were never actually used. Instead the bulk-endpoint numbers are
hardcoded to 1 and 2 (matching the specification), while the interrupt-
endpoint descriptor was assumed to be the third descriptor created by
USB core.
Try to bring some order to this by dropping the bogus lookup helper and
adding the missing endpoint sanity checks while keeping the interrupt-
descriptor assumption for now.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit a0dced17ad9dc08b1b25e0065b54c97a318e6e8b ]
This reverts commit 71130f29979c7c7956b040673e6b9d5643003176.
In commit 71130f29979c ("vxlan: fix tos value before xmit") we want to
make sure the tos value are filtered by RT_TOS() based on RFC1349.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| PRECEDENCE | TOS | MBZ |
+-----+-----+-----+-----+-----+-----+-----+-----+
But RFC1349 has been obsoleted by RFC2474. The new DSCP field defined like
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
So with
IPTOS_TOS_MASK 0x1E
RT_TOS(tos) ((tos)&IPTOS_TOS_MASK)
the first 3 bits DSCP info will get lost.
To take all the DSCP info in xmit, we should revert the patch and just push
all tos bits to ip_tunnel_ecn_encap(), which will handling ECN field later.
Fixes: 71130f29979c ("vxlan: fix tos value before xmit")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 024a8168b749db7a4aa40a5fbdfa04bf7e77c1c0 ]
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit c2c633106453611be07821f53dff9e93a9d1c3f0 ]
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 015c5d5e6aa3523c758a70eb87b291cece2dbbb4 ]
According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().
ravb e6800000.ethernet ethernet: failed to switch device to config mode
This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().
To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.
[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 7d8e8f3433dc8d1dc87c1aabe73a154978fb4c4d ]
The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.
Fix this by increasing the scope of the RCU read-side critical section.
Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 63634aa679ba8b5e306ad0727120309ae6ba8a8e ]
The interrupt URB transfer-buffer was never freed on disconnect or after
probe errors.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 8d8e95fd6d69d774013f51e5f2ee10c6e6d1fc14 ]
Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.
Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 728c1e2a05e4b5fc52fab3421dce772a806612a2 ]
In ath9k_wmi_cmd, the allocated network buffer needs to be released
if timeout happens. Otherwise memory will be leaked.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 853acf7caf10b828102d92d05b5c101666a6142b ]
In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service
if time out happens, the allocated buffer needs to be released.
Otherwise there will be memory leak.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 297a6961ffb8ff4dc66c9fbf53b924bd1dda05d5 ]
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
This is detected by Coccinelle semantic patch.
@@
expression pdev, res, n, t, e, e1, e2;
@@
res = platform_get_resource(pdev, t, n);
+ if (!res)
+ return -EINVAL;
... when != res == NULL
e = devm_ioremap(e1, res->start, e2);
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | |\|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Changes in 4.4.232
pinctrl: amd: fix npins for uart0 in kerncz_groups
mac80211: allow rx of mesh eapol frames with default rx key
scsi: scsi_transport_spi: Fix function pointer check
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
xtensa: update *pos in cpuinfo_op.next
drivers/net/wan/lapbether: Fixed the value of hard_header_len
net: sky2: initialize return of gm_phy_read
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
perf/core: Fix locking for children siblings group read
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
btrfs: fix double free on ulist after backref resolution failure
x86/fpu: Disable bottom halves while loading FPU registers
btrfs: fix mount failure caused by race with umount
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
ax88172a: fix ax88172a_unbind() failures
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
net: smc91x: Fix possible memory leak in smc_drv_probe()
scripts/decode_stacktrace: strip basepath from all paths
regmap: dev_get_regmap_match(): fix string comparison
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
x86: math-emu: Fix up 'cmp' insn for clang ias
Revert "cifs: Fix the target file was deleted when rename failed."
staging: wlan-ng: properly check endpoint types
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
serial: 8250_mtk: Fix high-speed baud rates clamping
mm/memcg: fix refcount error while moving and swapping
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
ath9k: Fix regression with Atheros 9271
AX.25: Fix out-of-bounds read in ax25_connect()
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
net-sysfs: add a newline when printing 'tx_timeout' by sysfs
net: udp: Fix wrong clean up for IS_UDPLITE macro
AX.25: Prevent integer overflows in connect and sendmsg
tcp: allow at most one TLP probe per flight
rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA
ip6_gre: fix null-ptr-deref in ip6gre_init_net()
drivers/net/wan/x25_asy: Fix to make it work
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
regmap: debugfs: check count when read regmap file
xfs: set format back to extents if xfs_bmap_extents_to_btree
tools/lib/subcmd/pager.c: do not alias select() params
perf: Make perf able to build with latest libbfd
perf tools: Fix snprint warnings for gcc 8
perf annotate: Use asprintf when formatting objdump command line
perf probe: Fix to check blacklist address correctly
Linux 4.4.232
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Id3f07fa9b926d859582a8f3aa50c7e4c0c847a77
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]
This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.
When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.
The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.
Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.
This fix allows ath9k_htc modules to connect to WLAN once again.
Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Roman Mamedov <rm@romanrm.net>
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ]
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.
Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ]
From Documentation/networking/timestamping.txt:
A driver which supports hardware time stamping shall update the
struct with the actual, possibly more permissive configuration.
Do update the struct passed when we upscale the requested time
stamping mode.
Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ]
If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.
Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]
The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.
Fix it and have it consistent with the corresponding call in 'rr_close()'.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]
clang static analysis flags this garbage return
drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
return v;
^~~~~~~~
static inline u16 gm_phy_read( ...
{
u16 v;
__gm_phy_read(hw, port, reg, &v);
return v;
}
__gm_phy_read can return without setting v.
So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]
When this driver transmits data,
first this driver will remove a pseudo header of 1 byte,
then the lapb module will prepend the LAPB header of 2 or 3 bytes,
then this driver will prepend a length field of 2 bytes,
then the underlying Ethernet device will prepend its own header.
So, the header length required should be:
-1 + 3 + 2 + "the header length needed by the underlying device".
This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
| |\ \ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
https://source.codeaurora.org/quic/la/kernel/msm-4.4 into lineage-17.1-caf-msm8998
* tag 'LA.UM.8.4.r1-05900-8x98.0' of https://source.codeaurora.org/quic/la/kernel/msm-4.4:
msm: kgsl: Mark the scratch buffer as privileged
power: qcom: Add the QPNP QGAUGE (QG) headers
msm: ipa: update msm_ipa.h with latest IPA versions constants
nl80211: add NL80211_CMD_UPDATE_FT_IES to supported commands
msm: mdss: hdmi: proper error logging
ASoC: Fix warnings and errors with llvm
sdm660_cdc: Reset cache_only mode for non SSR scenario
include: Fix for compilation issue
Makefile: Suppress few warnings with clang
kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS
kbuild: initialize CLANG_FLAGS correctly in the top Makefile
kbuild: consolidate Clang compiler flags
kbuild: add -no-integrated-as Clang option unconditionally
power: qpnp-fg-gen3: Fix warning with llvm
lkdtm: Fix warning with llvm
AndroidKernel: Explicitly mark certain targets as phony
dsp: q6asm: Change to increase asm sessions allowed
dsp: q6adm: Channel map configuration for multi-channel
defconfig: Create symbolic link for arm64 defconfigs
scripts/build-all: remove pattern-based defconfig detection
scripts/build-all: look for nested vendor/ defconfig directories
scripts/build-all: remove all defconfig manipulation options
scripts: build-all.py: update regex to compile all defconfigs
scripts: build-all.py: append llvm to the config file
scripts: Clean up the gcc-wrapper white list
scripts: set clang as REAL_CC to support LLVM by default
defconfig: auto: remove auto defconfigs
vgacon: Fix a UAF in vgacon_invert_region
soc: qcom: Reset string table index for each dump collection request
msm: adsprpc: Fix array index underflow problem
ath10k: remove unnecessary code
drm/msm/dsi: use correct enum in dsi_get_cmd_fmt
btrfs: Remove extra parentheses from condition in copy_items()
do_last(): fetch directory ->i_mode and ->i_uid before it's too late
Conflicts:
fs/namei.c
scripts/gcc-wrapper.py
Change-Id: Icfb78abcc0f2cf980b5c0ceaf40f108038b1b527
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The array fields in struct wmi_start_scan_arg that are checked here are
fixed size arrays so they can never be NULL.
Change-Id: I5c80a9758328df2eff1fa7c4bb433d0370f67143
Addresses-Coverity-ID: 1260031
Cc: Arend Van Spriel <arend.vanspriel@broadcom.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Git-repo: https://source.codeaurora.org/quic/la/kernel/msm-4.4
Git-commit: 8c1f20815231edf1ed2b7133ea07ea94ca31db05
Signed-off-by: Swetha Chikkaboraiah <schikk@codeaurora.org>
|
| |\ \ \ \
| | |/ /
| |/| |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
https://android.googlesource.com/kernel/common into lineage-17.1-caf-msm8998
This brings LA.UM.8.4.r1-05700-8x98.0 up to date with
https://android.googlesource.com/kernel/common/ android-4.4-p at commit:
8476df741c780 BACKPORT: xtables: extend matches and targets with .usersize
Conflicts:
drivers/usb/gadget/function/f_uac1.c
net/netlink/genetlink.c
sound/core/compress_offload.c
Change-Id: Id7b2fdf3942f1986edec869dcd965df632cc1c5f
|
| | |\ \ \
| | | |/
| | |/|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Changes in 4.4.231
KVM: s390: reduce number of IO pins to 1
spi: spidev: fix a race between spidev_release and spidev_remove
spi: spidev: fix a potential use-after-free in spidev_release()
scsi: mptscsih: Fix read sense data size
net: cxgb4: fix return error value in t4_prep_fw
smsc95xx: check return value of smsc95xx_reset
smsc95xx: avoid memory leak in smsc95xx_bind
ALSA: compress: fix partial_drain completion state
arm64: kgdb: Fix single-step exception handling oops
ALSA: opl3: fix infoleak in opl3
ALSA: hda - let hs_mic be picked ahead of hp_mic
ALSA: usb-audio: add quirk for MacroSilicon MS2109
KVM: x86: bit 8 of non-leaf PDPEs is not reserved
Revert "ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb"
btrfs: fix fatal extent_buffer readahead vs releasepage race
drm/radeon: fix double free
ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE
ARC: elf: use right ELF_ARCH
bnxt_en: fix NULL dereference in case SR-IOV configuration fails
ipv4: fill fl4_icmp_{type,code} in ping_v4_sendmsg
l2tp: remove skb_dst_set() from l2tp_xmit_skb()
llc: make sure applications use ARPHRD_ETHER
net: Added pointer check for dst->ops->neigh_lookup in dst_neigh_lookup_skb
genetlink: remove genl_bind
tcp: make sure listeners don't initialize congestion-control state
tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()
tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers
tcp: md5: allow changing MD5 keys in all socket states
i2c: eg20t: Load module automatically if ID matches
Revert "usb/ehci-platform: Set PM runtime as active on resume"
Revert "usb/xhci-plat: Set PM runtime as active on resume"
Revert "usb/ohci-platform: Fix a warning when hibernating"
usb: gadget: udc: atmel: fix uninitialized read in debug printk
staging: comedi: verify array index is correct before using it
perf stat: Zero all the 'ena' and 'run' array slot stats for interval mode
mtd: rawnand: brcmnand: fix CS0 layout
HID: magicmouse: do not set up autorepeat
usb: core: Add a helper function to check the validity of EP type in URB
ALSA: line6: Perform sanity check for each URB creation
ALSA: usb-audio: Fix race against the error recovery URB submission
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: chipidea: core: add wakeup support for extcon
usb: gadget: function: fix missing spinlock in f_uac1_legacy
USB: serial: iuu_phoenix: fix memory corruption
USB: serial: cypress_m8: enable Simply Automated UPB PIM
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: option: add Quectel EG95 LTE modem
virtio: virtio_console: add missing MODULE_DEVICE_TABLE() for rproc serial
fuse: Fix parameter for FS_IOC_{GET,SET}FLAGS
mei: bus: don't clean driver pointer
Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
uio_pdrv_genirq: fix use without device tree and no interrupt
MIPS: Fix build for LTS kernel caused by backporting lpj adjustment
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler
misc: atmel-ssc: lock with mutex instead of spinlock
sched/fair: handle case of task_h_load() returning 0
Linux 4.4.231
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibbd0a09b0d8d49101c674cf304c3df711e940b77
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
commit c8b1d7436045d3599bae56aef1682813ecccaad7 upstream.
we need to set 'active_vfs' back to 0, if something goes wrong during the
allocation of SR-IOV resources: otherwise, further VF configurations will
wrongly assume that bp->pf.vf[x] are valid memory locations, and commands
like the ones in the following sequence:
# echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs
# ip link set dev ens1f0np0 up
# ip link set dev ens1f0np0 vf 0 trust on
will cause a kernel crash similar to this:
bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV
BUG: kernel NULL pointer dereference, address: 0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871
Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019
RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en]
Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89
RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900
RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008
R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000
R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0
FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
do_setlink+0x994/0xfe0
__rtnl_newlink+0x544/0x8d0
rtnl_newlink+0x47/0x70
rtnetlink_rcv_msg+0x29f/0x350
netlink_rcv_skb+0x4a/0x110
netlink_unicast+0x21d/0x300
netlink_sendmsg+0x329/0x450
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x204/0x280
___sys_sendmsg+0x88/0xd0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x47/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Fei Liu <feliu@redhat.com>
CC: Jonathan Toppins <jtoppins@redhat.com>
CC: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
