summaryrefslogtreecommitdiff
path: root/drivers/mtd (follow)
Commit message (Collapse)AuthorAge
...
| * | | | mtd: spi-nor: Add support for Macronix mx25u6435f serial flashMika Westerberg2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Macronix (mx25u6435f) 8MB flash to the list of supported chips. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: spi-nor: Add support for Winbond w25q64dw serial flashMika Westerberg2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Winbond (w25q64dw) 8MB flash to the list of supported chips. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: spi-nor: add support for the Winbond W25X05 flashGabor Juhos2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: spi-nor: support en25s64 deviceShengzhou Liu2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for EON en25s64 SPI flash. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: m25p80: bind to "nor-jedec" ID, for auto-detectionBrian Norris2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new 'nor-jedec' binding to provide automatic detection of flash that use the 0x9F READ ID opcode. This can help for use cases where platforms just specify compatibility with "m25p80", and then see messages like this: m25p80 spi32766.0: found s25fl256s1, expected m25p80 Instead, they can just specify the generic string and see this: m25p80 spi32766.0: s25fl256s1 (32768 Kbytes) Also, update the language about m25p_ids[] to straighten out the expectations here. We should no longer need to continuously grow the m25p_ids[] table, and in fact, we might want to start removing entries which are not used in device trees so far, so we can just default to auto-detection as much as possible in the future. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com>
| * | | | mtd: Make MTD tests cancelableRichard Weinberger2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I always go nuts when I start an MTD test on a slow device and have to wait forever until it finishes. From the debug output I already know what the issue is but I have to wait or reset the board hard. Resetting is often not an option (remote access, you don't want lose the current state, etc...). The solution is easy, check for pending signals at key positions in the code. Using that one can even stop a test by pressing CTRL-C as insmod/modprobe have SIGINT pending. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mtd_oobtest: Fix bitflip_limit usage in test case 3Roger Quadros2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In test case 3, we set vary_offset to write at different offsets and lengths in the OOB available area. We need to do the bitflip_limit check while checking for 0xff outside the OOB offset + length area that we didn't modify during write. Signed-off-by: Roger Quadros <rogerq@ti.com> [Brian: whitespace fixup] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: docg3: remove invalid __exit annotationsBrian Norris2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .remove callback may be used when detaching a device via sysfs, so we can't expect to free up this memory. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
| * | | | mtd: fsl_ifc_nand: use msecs_to_jiffies for time conversionNicholas Mc Guire2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is only an API consolidation and should make things more readable it replaces var * HZ / 1000 by msecs_to_jiffies(var) which helps readability and also handles all corner-cases properly. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: atmel_nand: don't map the ROM table if no pmecc table offset in DTWu, Josh2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if atmel,pmecc-lookup-table-offset is not found in DT node, we don't need to map the ROM table as we will build a runtime gf table anyway. Reported-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: atmel_nand: add a definition for the oob reserved bytesJosh Wu2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's better to use a macro instead of just a number. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: part: Remove partition overlap checksDan Ehrenberg2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes MTD dynamic partitioning more flexible by removing overlap checks for dynamic partitions. I don't see any particular reason why overlapping dynamic partitions should be prohibited while static partitions are allowed to overlap freely. The checks previously had an off-by-one error, where 'end' should be one less than what it is currently set at, and adding partitions out of increasing order will fail. Disabling the checks resolves this issue. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: part: Add sysfs variable for offset of partitionDan Ehrenberg2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes a sysfs variable called 'offset' on each partition which contains the offset in bytes from the beginning of the master device that the partition starts. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: part: Create the master device node when partitionedDan Ehrenberg2015-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For many use cases, it helps to have a device node for the entire MTD device as well as device nodes for the individual partitions. For example, this allows querying the entire device's properties. A common idiom is to create an additional partition which spans over the whole device. This patch makes a config option, CONFIG_MTD_PARTITIONED_MASTER, which makes the master partition present even when the device is partitioned. This isn't turned on by default since it presents a backwards-incompatible device numbering. The patch also makes the parent of a partition device be the master, if the config flag is set, now that the master is a full device. Signed-off-by: Dan Ehrenberg <dehrenberg@chromium.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: ts5500_flash: Fix typo in MODULE_DESCRIPTION in ts5500_flash.cMasanari Iida2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a spelling typo in MODULE_DESCRIPTION in ts5500_flash.c. Signed-off-by: Masanari Iida <standby24x7@gmail.com> [ Brian: fixed grammar in a spelling patch :) ] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: denali: Disable sub-page writes in Denali NAND driverGraham Moore2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Denali Controller IP does not support sub-page writes. Signed-off-by: Graham Moore <grmoore@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: pxa3xx_nand: cleanup wait_for_completion handlingNicholas Mc Guire2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int, this patch uses the return value of wait_for_completion_timeout in the condition directly rather than assigning it to an incorrect type variable. The variable used for handling the return of wait_for_cmpletion_timeout was int but should be unsigned long, where it was not in use for anything else and the return value in case of completion (>0) is not used it was removed and wait_for_completion_timeout() used directly in the if condition. To make the timeout values a bit simpler to read and also handle all of the corner cases correctly the declarations are moved to msecs_to_jiffies(). The timeout declaration cleanup is just for readability Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: gpmi: Check for scan_bbt() errorFabio Estevam2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of scan_bbt() failure, we should better propagate it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Huang Shijie <shijie.huang@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: gpmi: fixup return type of wait_for_completion_timeoutNicholas Mc Guire2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int. The return variable is renamed to reflect its use and the type adjusted to unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Huang Shijie <shijie.huang@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: fsl-quadspi: cleanup wait_for_completion return handlingNicholas Mc Guire2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return type of wait_for_completion_timeout is unsigned long not int, this patch uses the return value of wait_for_completion_timeout in the condition directly rather than adding a additional appropriately typed variable. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Han Xu <han.xu@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: fsl-quadspi: Print the error valueFabio Estevam2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When displaying dev_err() messages it is useful to print the error value. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Han Xu <han.xu@freescale.com> [Brian: fix up "can not" at the same time] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: cfi: clean up some indentingDan Carpenter2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These lines were all indented one tab more than they should be. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: maps: sa1100-flash: remove incorrect __exit markupsDmitry Torokhov2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even if bus is not hot-pluggable, the devices can be unbound from the driver via sysfs, so we should not be using __exit annotations on remove() methods. The only exception is drivers registered with platform_driver_probe() which specifically disables sysfs bind/unbind attributes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: replace CONFIG_8xx by CONFIG_PPC_8xxChristophe Leroy2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two config options exist to define powerpc MPC8xx: * CONFIG_PPC_8xx * CONFIG_8xx In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as communication co-processor arch/powerpc/platforms/Kconfig.cputype has contained the following comment about CONFIG_8xx item for some years: "# this is temp to handle compat with arch=ppc" It looks like not many places still have that old CONFIG_8xx used, so it is likely to be a good time to get rid of it completely ? Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: fsmc_nand.c: Use default timings if none are provided in the dtsStefan Roese2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch the timings are all set to 0 if not specified in the dts. With this patch the driver falls back to use the defaults that are already present in the driver and are known to work okay for some (older) boards. Tested on a custom SPEAr600 based board. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: Prevent possible kernel lockup in nand_command()Roger Quadros2015-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a NAND device is not really present or pin muxes are not correctly configured we can lock up the kernel waiting infinitely for NAND_STATUS to be ready. This can be easily reproduced on TI's DRA7-evm board by booting it without NAND support in u-boot and disabling NAND pin muxes in the kernel. Add timeout when waiting for NAND_CMD_RESET completion. As per ONFi v4.0 tRST can be upto 250ms for EZ-NAND and 5ms for raw NAND. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: spi-nor: factor out replace-able flash_{lock,unlock}Brian Norris2015-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Flash lock/unlock is a flash-specific operations. Factor out a callback for it to more readily support other vendors. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: VIET NGA DAO <vndao@altera.com>
| * | | | mtd: nand: fix spelling of REPLACEABLEBrian Norris2015-03-24
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: fully initialize mtd_oob_opsBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're not initializing the ooblen field. Our users don't care, since they check that oobbuf == NULL first, but it's good practice to zero unused fields out. We can drop the NULL initializations since we're memset()ing the whole thing. Noticed by Coverity, CID #200821, #200822 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: blkdevs: remove dead codeBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only exit (break) from the preceding loop is nested within a condition which yields req == NULL. This code is dead. Coverity CID #752669 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: nand: denali: drop dead codeBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TclsRising is always 1. Caught by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | | | mtd: nand: fixup bounds checks for nand_{lock,unlock}()Brian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity noticed that these 'ret' assignments weren't being used. Let's use them. Note that nand_lock() and nand_unlock() are still not officially used by any drivers. Coverity CIDs #1227054 and #1227037 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: tests: fix more potential integer overflowsBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Caught by Coverity (CID #200625 and others) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
| * | | | mtd: onenand: drop dead codeBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'ret' is always zero, so this is all dead code. This should quiet Coverity CID #1226739. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
| * | | | mtd: docg3: drop dead codeBrian Norris2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If no devices were found, we would already have skipped over this code. Detected by Coverity, CID #744270 Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
| * | | | mtd: mxc-nand: Warn on unimplemented commandsUwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PARAM command was long unimplemented and it probably wasn't noticed because chip probing using only the few bytes returned by the READID command are good enough in most cases to determine the chip in use. Still to notice such a shortcoming earlier in the future would be nice in case it's something more vital. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mxc-nand: Implement support for PARAM commandUwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mxc-nand driver never supported the PARAM command to read out the ONFI parameter page and so always relied on probing my manufacturer and device id (as provided by the READID command). This patch implements reading out the first parameter page copy at least which should be good enough in practise. This makes the boot log change from nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1 nand: Micron NAND 128MiB 1,8V 16-bit to nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xb1 nand: Micron MT29F1G16ABBDAH4 on my machine. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mxc-nand: Allow to use column addresses different from 0Uwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mxc-nand controller works pagewise and so usually only sends commands to the flash chip with column == 0. A request with column != 0 from the upper layer is then fulfilled by indexing appropriately into the device's RAM buffer. To be able to access the ONFI marker at offset 0x20 in reply to the READID command however it's invalid to read 32 bytes starting from column 0. So let the function used to send the address cycles send the column address actually passed instead of 0 and fix all callers to pass 0 instead appropriately. Also add some warnings in case this patch changes the drivers semantics. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mxc-nand: Do the word to byte mangling in the read_byte callbackUwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the hardware operates in 16 bit mode it always reads 16 bits even for operations that only have the lower 8 bits defined. So the upper bits must be discarded. Do this in the read_byte callback instead of when reading the NAND id to support reading byte wise more than 5 bytes and at other occations (like reading the ONFI parameter page). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mxc-nand: Only enable hardware checksumming for fully detected flashesUwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least on i.MX25 (i.e. NFCv2) preset_v2 is called with mtd->writesize == 0 that is before the connect flash chip is detected. It then configures for 8 bit ECC mode which needs 26 bytes of OOB per 512 bytes main section. For flashes with a smaller OOB area issuing a read page command makes the controller stuck with this config. Note that this currently doesn't hurt because the first read page command is issued only after detection is complete and preset is called once more. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: mxc-nand: Add a timeout when waiting for interruptUwe Kleine-König2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While extending the mxc-nand driver it happend to me a few times that the device was stuck and this made the machine hang during boot. So implement a timeout and print a stack trace the first time this happens to make it debuggable. The return type of the waiting function is also changed to int to be able to handle the timeout in the caller. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: atmel_nand: check NFC busy flag by HSMC_SR instead of NFC cmd regsBoris Brezillon2015-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the driver read NFC command registers to get NFC busy flag. Actually this flag also can be get by reading HSMC_SR register. Use the read NFC command registers need mapping a huge memory region. To save the mapped memory region, we change to check NFC busy flag by reading HSMC_SR register. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: atmel_nand: fix typo in dev_err error messageColin Ian King2015-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typo, "Unkown" -> "Unknown" Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: s3c2410: drop useless / misspelled debug printsBrian Norris2015-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | s3c2410_nand_probe is not the name of the function. These prints have little utility, so let's just kill them. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | mtd: pxa3xx_nand: initialiaze pxa3xx_flash_ids to 0Antoine Ténart2015-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pxa3xx_flash_ids wasn't initialized to 0, which in certain cases could end up containing corrupted values in its members. Fix this to avoid possible issues. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | Merge MTD updates into -nextBrian Norris2015-02-28
| |\ \ \ \
| * | | | | mtd: pxa3xx-nand: handle PIO in threaded interruptRobert Jarzmik2015-02-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the handling of the data stage in the driver : don't pump data in the top-half interrupt, but rather schedule a thread for non dma cases. This will enable latencies in the data pumping, especially if delays are required. Moreover platform shall be more reactive as other interrupts can be served while pumping data. No throughput degradation was observed, at least on the zylonite platform, while a slight degradation was being expected. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
| * | | | | Merge MTD updates into -nextBrian Norris2015-02-28
| |\ \ \ \ \
| * | | | | | mtd: block2mtd: wait until block devices are presentedFelix Fietkau2015-02-23
| | |_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensures that block2mtd is triggered after the block devices are enumerated at boot time. This issue is seen on BCM2835 (Raspberry Pi) systems when mounting JFFS2 block2mtd filesystems, probably because of the delay on enumerating a USB MMC card reader. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rodrigo Freire <rfreire@redhat.com> Signed-off-by: Herton Krzesinski <herton@redhat.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* | | | | | Merge tag 'upstream-4.1-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2015-04-15
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull UBI/UBIFS updates from Richard Weinberger: "This pull request includes the following UBI/UBIFS changes: - powercut emulation for UBI - a huge update to UBI Fastmap - cleanups and bugfixes all over UBI and UBIFS" * tag 'upstream-4.1-rc1' of git://git.infradead.org/linux-ubifs: (50 commits) UBI: power cut emulation for testing UBIFS: fix output format of INUM_WATERMARK UBI: Fastmap: Fall back to scanning mode after ECC error UBI: Fastmap: Remove is_fm_block() UBI: Fastmap: Add blank line after declarations UBI: Fastmap: Remove else after return. UBI: Fastmap: Introduce may_reserve_for_fm() UBI: Fastmap: Introduce ubi_fastmap_init() UBI: Fastmap: Wire up WL accessor functions UBI: Add accessor functions for WL data structures UBI: Move fastmap specific functions out of wl.c UBI: Fastmap: Add new module parameter fm_debug UBI: Fastmap: Make self_check_eba() depend on fastmap self checking UBI: Fastmap: Add self check to detect absent PEBs UBI: Fix stale pointers in ubi->lookuptbl UBI: Fastmap: Enhance fastmap checking UBI: Add initial support for fastmap self checks UBI: Fastmap: Rework fastmap error paths UBI: Fastmap: Prepare for variable sized fastmaps UBI: Fastmap: Locking updates ...
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-16 00:09:12 +0000