diff options
Diffstat (limited to 'drivers/usb/host/xhci-plat.c')
| -rw-r--r-- | drivers/usb/host/xhci-plat.c | 500 |
1 files changed, 500 insertions, 0 deletions
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c new file mode 100644 index 000000000000..a0917a135c5d --- /dev/null +++ b/drivers/usb/host/xhci-plat.c @@ -0,0 +1,500 @@ +/* + * xhci-plat.c - xHCI host controller driver platform Bus Glue. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * A lot of code borrowed from the Linux xHCI driver. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/usb/phy.h> +#include <linux/slab.h> +#include <linux/usb/xhci_pdriver.h> +#include <linux/acpi.h> + +#include "xhci.h" +#include "xhci-mvebu.h" +#include "xhci-rcar.h" + +static struct hc_driver __read_mostly xhci_plat_hc_driver; + +static int xhci_plat_setup(struct usb_hcd *hcd); +static int xhci_plat_start(struct usb_hcd *hcd); + +static const struct xhci_driver_overrides xhci_plat_overrides __initconst = { + .extra_priv_size = sizeof(struct xhci_hcd), + .reset = xhci_plat_setup, + .start = xhci_plat_start, +}; + +static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) +{ + struct device_node *node = dev->of_node; + struct usb_xhci_pdata *pdata = dev_get_platdata(dev); + + /* + * As of now platform drivers don't provide MSI support so we ensure + * here that the generic code does not try to make a pci_dev from our + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; + + if ((node && of_property_read_bool(node, "usb3-lpm-capable")) || + (pdata && pdata->usb3_lpm_capable)) + xhci->quirks |= XHCI_LPM_SUPPORT; +} + +/* called during probe() after chip reset completes */ +static int xhci_plat_setup(struct usb_hcd *hcd) +{ + struct device_node *of_node = hcd->self.controller->of_node; + int ret; + + if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") || + of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) { + ret = xhci_rcar_init_quirk(hcd); + if (ret) + return ret; + } + + return xhci_gen_setup(hcd, xhci_plat_quirks); +} + +static int xhci_plat_start(struct usb_hcd *hcd) +{ + struct device_node *of_node = hcd->self.controller->of_node; + + if (of_device_is_compatible(of_node, "renesas,xhci-r8a7790") || + of_device_is_compatible(of_node, "renesas,xhci-r8a7791")) + xhci_rcar_start(hcd); + + return xhci_run(hcd); +} + +static ssize_t config_imod_store(struct device *pdev, + struct device_attribute *attr, const char *buff, size_t size) +{ + struct usb_hcd *hcd = dev_get_drvdata(pdev); + struct xhci_hcd *xhci; + u32 temp; + u32 imod; + unsigned long flags; + + if (kstrtouint(buff, 10, &imod) != 1) + return 0; + + imod &= ER_IRQ_INTERVAL_MASK; + xhci = hcd_to_xhci(hcd); + + if (xhci->shared_hcd->state == HC_STATE_SUSPENDED + && hcd->state == HC_STATE_SUSPENDED) + return -EACCES; + + spin_lock_irqsave(&xhci->lock, flags); + temp = readl_relaxed(&xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; + temp |= imod; + writel_relaxed(temp, &xhci->ir_set->irq_control); + spin_unlock_irqrestore(&xhci->lock, flags); + + return size; +} + +static ssize_t config_imod_show(struct device *pdev, + struct device_attribute *attr, char *buff) +{ + struct usb_hcd *hcd = dev_get_drvdata(pdev); + struct xhci_hcd *xhci; + u32 temp; + unsigned long flags; + + xhci = hcd_to_xhci(hcd); + + if (xhci->shared_hcd->state == HC_STATE_SUSPENDED + && hcd->state == HC_STATE_SUSPENDED) + return -EACCES; + + spin_lock_irqsave(&xhci->lock, flags); + temp = readl_relaxed(&xhci->ir_set->irq_control) & + ER_IRQ_INTERVAL_MASK; + spin_unlock_irqrestore(&xhci->lock, flags); + + return snprintf(buff, PAGE_SIZE, "%08u\n", temp); +} + +static DEVICE_ATTR(config_imod, S_IRUGO | S_IWUSR, + config_imod_show, config_imod_store); + +static int xhci_plat_probe(struct platform_device *pdev) +{ + struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev); + const struct hc_driver *driver; + struct xhci_hcd *xhci; + struct resource *res; + struct usb_hcd *hcd; + struct clk *clk; + int ret; + int irq; + u32 temp, imod; + unsigned long flags; + + if (usb_disabled()) + return -ENODEV; + + driver = &xhci_plat_hc_driver; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* Try to set 64-bit DMA first */ + if (WARN_ON(!pdev->dev.dma_mask)) + /* Platform did not initialize dma_mask */ + ret = dma_coerce_mask_and_coherent(&pdev->dev, + DMA_BIT_MASK(64)); + else + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + + /* If seting 64-bit DMA mask fails, fall back to 32-bit DMA mask */ + if (ret) { + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + hcd_to_bus(hcd)->skip_resume = true; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(hcd->regs)) { + ret = PTR_ERR(hcd->regs); + goto put_hcd; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + /* + * Not all platforms have a clk so it is not an error if the + * clock does not exists. + */ + clk = devm_clk_get(&pdev->dev, NULL); + if (!IS_ERR(clk)) { + ret = clk_prepare_enable(clk); + if (ret) + goto put_hcd; + } else if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; + } + + if (pdev->dev.parent) + pm_runtime_resume(pdev->dev.parent); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 1000); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + if (of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-375-xhci") || + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-380-xhci")) { + ret = xhci_mvebu_mbus_init_quirk(pdev); + if (ret) + goto disable_clk; + } + + device_wakeup_enable(hcd->self.controller); + + xhci = hcd_to_xhci(hcd); + xhci->clk = clk; + xhci->main_hcd = hcd; + xhci->shared_hcd = usb_create_shared_hcd(driver, &pdev->dev, + dev_name(&pdev->dev), hcd); + if (!xhci->shared_hcd) { + ret = -ENOMEM; + goto disable_clk; + } + + hcd_to_bus(xhci->shared_hcd)->skip_resume = true; + + hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); + if (IS_ERR(hcd->usb_phy)) { + ret = PTR_ERR(hcd->usb_phy); + if (ret == -EPROBE_DEFER) + goto put_usb3_hcd; + hcd->usb_phy = NULL; + } else { + ret = usb_phy_init(hcd->usb_phy); + if (ret) + goto put_usb3_hcd; + } + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) + goto disable_usb_phy; + + device_wakeup_enable(&hcd->self.root_hub->dev); + + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); + if (ret) + goto dealloc_usb2_hcd; + + device_wakeup_enable(&xhci->shared_hcd->self.root_hub->dev); + + /* override imod interval if specified */ + if (pdata && pdata->imod_interval) { + imod = pdata->imod_interval & ER_IRQ_INTERVAL_MASK; + spin_lock_irqsave(&xhci->lock, flags); + temp = readl_relaxed(&xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; + temp |= imod; + writel_relaxed(temp, &xhci->ir_set->irq_control); + spin_unlock_irqrestore(&xhci->lock, flags); + dev_dbg(&pdev->dev, "%s: imod set to %u\n", __func__, imod); + } + + ret = device_create_file(&pdev->dev, &dev_attr_config_imod); + if (ret) + dev_err(&pdev->dev, "%s: unable to create imod sysfs entry\n", + __func__); + + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); + + return 0; + + +dealloc_usb2_hcd: + usb_remove_hcd(hcd); + +disable_usb_phy: + usb_phy_shutdown(hcd->usb_phy); + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); + +disable_clk: + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_disable(&pdev->dev); + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); + +put_hcd: + usb_put_hcd(hcd); + + return ret; +} + +static int xhci_plat_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct clk *clk = xhci->clk; + + device_remove_file(&dev->dev, &dev_attr_config_imod); + xhci->xhc_state |= XHCI_STATE_REMOVING; + usb_remove_hcd(xhci->shared_hcd); + usb_phy_shutdown(hcd->usb_phy); + + usb_remove_hcd(hcd); + usb_put_hcd(xhci->shared_hcd); + + if (!IS_ERR(clk)) + clk_disable_unprepare(clk); + usb_put_hcd(hcd); + + pm_runtime_set_suspended(&dev->dev); + pm_runtime_disable(&dev->dev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int xhci_plat_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat PM suspend\n"); + + return xhci_suspend(xhci, true); +} + +static int xhci_plat_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat PM resume\n"); + + return (!hcd_to_bus(hcd)->skip_resume) ? xhci_resume(xhci, false) : 0; +} +#endif + +#ifdef CONFIG_PM +static int xhci_plat_runtime_idle(struct device *dev) +{ + /* + * When pm_runtime_put_autosuspend() is called on this device, + * after this idle callback returns the PM core will schedule the + * autosuspend if there is any remaining time until expiry. However, + * when reaching this point because the child_count becomes 0, the + * core does not honor autosuspend in that case and results in + * idle/suspend happening immediately. In order to have a delay + * before suspend we have to call pm_runtime_autosuspend() manually. + */ + pm_runtime_mark_last_busy(dev); + pm_runtime_autosuspend(dev); + return -EBUSY; +} + +static int xhci_plat_pm_freeze(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat freeze\n"); + + return xhci_suspend(xhci, false); +} + +static int xhci_plat_pm_restore(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat restore\n"); + + ret = xhci_resume(xhci, true); + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_mark_last_busy(dev); + + return ret; +} + +static int xhci_plat_runtime_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat runtime suspend\n"); + + return xhci_suspend(xhci, true); +} + +static int xhci_plat_runtime_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + int ret; + + if (!xhci) + return 0; + + dev_dbg(dev, "xhci-plat runtime resume\n"); + + ret = xhci_resume(xhci, false); + pm_runtime_mark_last_busy(dev); + + return ret; +} + +static const struct dev_pm_ops xhci_plat_pm_ops = { + .suspend = xhci_plat_suspend, + .resume = xhci_plat_resume, + .freeze = xhci_plat_pm_freeze, + .restore = xhci_plat_pm_restore, + .thaw = xhci_plat_pm_restore, + SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume, + xhci_plat_runtime_idle) +}; +#define DEV_PM_OPS (&xhci_plat_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +#ifdef CONFIG_OF +static const struct of_device_id usb_xhci_of_match[] = { + { .compatible = "generic-xhci" }, + { .compatible = "xhci-platform" }, + { .compatible = "marvell,armada-375-xhci"}, + { .compatible = "marvell,armada-380-xhci"}, + { .compatible = "renesas,xhci-r8a7790"}, + { .compatible = "renesas,xhci-r8a7791"}, + { }, +}; +MODULE_DEVICE_TABLE(of, usb_xhci_of_match); +#endif + +static const struct acpi_device_id usb_xhci_acpi_match[] = { + /* XHCI-compliant USB Controller */ + { "PNP0D10", }, + { } +}; +MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); + +static struct platform_driver usb_xhci_driver = { + .probe = xhci_plat_probe, + .remove = xhci_plat_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "xhci-hcd", + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(usb_xhci_of_match), + .acpi_match_table = ACPI_PTR(usb_xhci_acpi_match), + }, +}; +MODULE_ALIAS("platform:xhci-hcd"); + +static int __init xhci_plat_init(void) +{ + xhci_init_driver(&xhci_plat_hc_driver, &xhci_plat_overrides); + return platform_driver_register(&usb_xhci_driver); +} +module_init(xhci_plat_init); + +static void __exit xhci_plat_exit(void) +{ + platform_driver_unregister(&usb_xhci_driver); +} +module_exit(xhci_plat_exit); + +MODULE_DESCRIPTION("xHCI Platform Host Controller Driver"); +MODULE_LICENSE("GPL"); |
