1 files changed, 118 insertions, 34 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1da876605e4d..5d21cd8359d4 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -348,7 +348,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
 
 	slot_id = 0;
 	for (i = 0; i < MAX_HC_SLOTS; i++) {
-		if (!xhci->devs[i])
+		if (!xhci->devs[i] || !xhci->devs[i]->udev)
 			continue;
 		speed = xhci->devs[i]->udev->speed;
 		if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
@@ -394,15 +394,25 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 						     GFP_NOWAIT);
 			if (!command) {
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_free_command(xhci, cmd);
-				return -ENOMEM;
+				ret = -ENOMEM;
+				goto cmd_cleanup;
+			}
 
+			ret = xhci_queue_stop_endpoint(xhci, command, slot_id,
+						       i, suspend);
+			if (ret) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_free_command(xhci, command);
+				goto cmd_cleanup;
 			}
-			xhci_queue_stop_endpoint(xhci, command, slot_id, i,
-						 suspend);
 		}
 	}
-	xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
+	ret = xhci_queue_stop_endpoint(xhci, cmd, slot_id, 0, suspend);
+	if (ret) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto cmd_cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
@@ -413,6 +423,8 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
 		xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
 		ret = -ETIME;
 	}
+
+cmd_cleanup:
 	xhci_free_command(xhci, cmd);
 	return ret;
 }
@@ -732,7 +744,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			status |= USB_PORT_STAT_SUSPEND;
 	}
 	if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
-		!DEV_SUPERSPEED_ANY(raw_port_status)) {
+		!DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
 		if ((raw_port_status & PORT_RESET) ||
 				!(raw_port_status & PORT_PE))
 			return 0xffffffff;
@@ -768,6 +780,9 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			clear_bit(wIndex, &bus_state->resuming_ports);
 
 			set_bit(wIndex, &bus_state->rexit_ports);
+
+			xhci_test_and_clear_bit(xhci, port_array, wIndex,
+						PORT_PLC);
 			xhci_set_link_state(xhci, port_array, wIndex,
 					XDEV_U0);
 
@@ -775,7 +790,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			time_left = wait_for_completion_timeout(
 					&bus_state->rexit_done[wIndex],
 					msecs_to_jiffies(
-						XHCI_MAX_REXIT_TIMEOUT));
+						XHCI_MAX_REXIT_TIMEOUT_MS));
 			spin_lock_irqsave(&xhci->lock, flags);
 
 			if (time_left) {
@@ -789,7 +804,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 			} else {
 				int port_status = readl(port_array[wIndex]);
 				xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
-						XHCI_MAX_REXIT_TIMEOUT,
+						XHCI_MAX_REXIT_TIMEOUT_MS,
 						port_status);
 				status |= USB_PORT_STAT_SUSPEND;
 				clear_bit(wIndex, &bus_state->rexit_ports);
@@ -1033,17 +1048,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				temp = readl(port_array[wIndex]);
 				break;
 			}
-
-			/* Software should not attempt to set
-			 * port link state above '3' (U3) and the port
-			 * must be enabled.
-			 */
-			if ((temp & PORT_PE) == 0 ||
-				(link_state > USB_SS_PORT_LS_U3)) {
-				xhci_warn(xhci, "Cannot set link state.\n");
+			/* Port must be enabled */
+			if (!(temp & PORT_PE)) {
+				retval = -ENODEV;
+				break;
+			}
+			/* Can't set port link state above '3' (U3) */
+			if (link_state > USB_SS_PORT_LS_U3) {
+				xhci_warn(xhci, "Cannot set port %d link state %d\n",
+					 wIndex, link_state);
 				goto error;
 			}
-
 			if (link_state == USB_SS_PORT_LS_U3) {
 				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
 						wIndex + 1);
@@ -1157,7 +1172,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_RESUME);
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				msleep(20);
+				msleep(USB_RESUME_TIMEOUT);
 				spin_lock_irqsave(&xhci->lock, flags);
 				xhci_set_link_state(xhci, port_array, wIndex,
 							XDEV_U0);
@@ -1283,13 +1298,16 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	__le32 __iomem **port_array;
 	struct xhci_bus_state *bus_state;
 	unsigned long flags;
+	u32 portsc_buf[USB_MAXCHILDREN];
+	bool wake_enabled;
 
 	max_ports = xhci_get_ports(hcd, &port_array);
 	bus_state = &xhci->bus_state[hcd_index(hcd)];
+	wake_enabled = hcd->self.root_hub->do_remote_wakeup;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 
-	if (hcd->self.root_hub->do_remote_wakeup) {
+	if (wake_enabled) {
 		if (bus_state->resuming_ports ||	/* USB2 */
 		    bus_state->port_remote_wakeup) {	/* USB3 */
 			spin_unlock_irqrestore(&xhci->lock, flags);
@@ -1297,26 +1315,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 			return -EBUSY;
 		}
 	}
-
-	port_index = max_ports;
+	/*
+	 * Prepare ports for suspend, but don't write anything before all ports
+	 * are checked and we know bus suspend can proceed
+	 */
 	bus_state->bus_suspended = 0;
+	port_index = max_ports;
 	while (port_index--) {
-		/* suspend the port if the port is not suspended */
 		u32 t1, t2;
-		int slot_id;
 
 		t1 = readl(port_array[port_index]);
 		t2 = xhci_port_state_to_neutral(t1);
+		portsc_buf[port_index] = 0;
 
-		if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) {
-			xhci_dbg(xhci, "port %d not suspended\n", port_index);
-			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					port_index + 1);
-			if (slot_id) {
+		/* Bail out if a USB3 port has a new device in link training */
+		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+			bus_state->bus_suspended = 0;
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
+			return -EBUSY;
+		}
+
+		/* suspend ports in U0, or bail out for new connect changes */
+		if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) {
+			if ((t1 & PORT_CSC) && wake_enabled) {
+				bus_state->bus_suspended = 0;
 				spin_unlock_irqrestore(&xhci->lock, flags);
-				xhci_stop_device(xhci, slot_id, 1);
-				spin_lock_irqsave(&xhci->lock, flags);
+				xhci_dbg(xhci, "Bus suspend bailout, port connect change\n");
+				return -EBUSY;
 			}
+			xhci_dbg(xhci, "port %d not suspended\n", port_index);
 			t2 &= ~PORT_PLS_MASK;
 			t2 |= PORT_LINK_STROBE | XDEV_U3;
 			set_bit(port_index, &bus_state->bus_suspended);
@@ -1325,7 +1353,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 		 * including the USB 3.0 roothub, but only if CONFIG_PM
 		 * is enabled, so also enable remote wake here.
 		 */
-		if (hcd->self.root_hub->do_remote_wakeup) {
+		if (wake_enabled) {
 			if (t1 & PORT_CONNECT) {
 				t2 |= PORT_WKOC_E | PORT_WKDISC_E;
 				t2 &= ~PORT_WKCONN_E;
@@ -1338,7 +1366,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 
 		t1 = xhci_port_state_to_neutral(t1);
 		if (t1 != t2)
-			writel(t2, port_array[port_index]);
+			portsc_buf[port_index] = t2;
+	}
+
+	/* write port settings, stopping and suspending ports if needed */
+	port_index = max_ports;
+	while (port_index--) {
+		if (!portsc_buf[port_index])
+			continue;
+		if (test_bit(port_index, &bus_state->bus_suspended)) {
+			int slot_id;
+
+			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
+							    port_index + 1);
+			if (slot_id) {
+				spin_unlock_irqrestore(&xhci->lock, flags);
+				xhci_stop_device(xhci, slot_id, 1);
+				spin_lock_irqsave(&xhci->lock, flags);
+			}
+		}
+		writel(portsc_buf[port_index], port_array[port_index]);
 	}
 	hcd->state = HC_STATE_SUSPENDED;
 	bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
@@ -1346,6 +1393,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
 	return 0;
 }
 
+/*
+ * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3.
+ * warm reset a USB3 device stuck in polling or compliance mode after resume.
+ * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8
+ */
+static bool xhci_port_missing_cas_quirk(int port_index,
+					     __le32 __iomem **port_array)
+{
+	u32 portsc;
+
+	portsc = readl(port_array[port_index]);
+
+	/* if any of these are set we are not stuck */
+	if (portsc & (PORT_CONNECT | PORT_CAS))
+		return false;
+
+	if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) &&
+	    ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE))
+		return false;
+
+	/* clear wakeup/change bits, and do a warm port reset */
+	portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
+	portsc |= PORT_WR;
+	writel(portsc, port_array[port_index]);
+	/* flush write */
+	readl(port_array[port_index]);
+	return true;
+}
+
 int xhci_bus_resume(struct usb_hcd *hcd)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
@@ -1383,6 +1459,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 		u32 temp;
 
 		temp = readl(port_array[port_index]);
+
+		/* warm reset CAS limited ports stuck in polling/compliance */
+		if ((xhci->quirks & XHCI_MISSING_CAS) &&
+		    (hcd->speed >= HCD_USB3) &&
+		    xhci_port_missing_cas_quirk(port_index, port_array)) {
+			xhci_dbg(xhci, "reset stuck port %d\n", port_index);
+			continue;
+		}
 		if (DEV_SUPERSPEED_ANY(temp))
 			temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS);
 		else
@@ -1401,7 +1485,7 @@ int xhci_bus_resume(struct usb_hcd *hcd)
 
 	if (need_usb2_u3_exit) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
-		msleep(20);
+		msleep(USB_RESUME_TIMEOUT);
 		spin_lock_irqsave(&xhci->lock, flags);
 	}