diff options
Diffstat (limited to 'drivers/usb/dwc3/dwc3-pci.c')
| -rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 237 |
1 files changed, 237 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c new file mode 100644 index 000000000000..68230adf2449 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -0,0 +1,237 @@ +/** + * dwc3-pci.c - PCI Specific glue layer + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * + * Authors: Felipe Balbi <balbi@ti.com>, + * Sebastian Andrzej Siewior <bigeasy@linutronix.de> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/gpio/consumer.h> +#include <linux/acpi.h> + +#include "platform_data.h" + +#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd +#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI 0xabce +#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31 0xabcf +#define PCI_DEVICE_ID_INTEL_BYT 0x0f37 +#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e +#define PCI_DEVICE_ID_INTEL_BSW 0x22b7 +#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30 +#define PCI_DEVICE_ID_INTEL_SPTH 0xa130 +#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa +#define PCI_DEVICE_ID_INTEL_APL 0x5aaa +#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 +#define PCI_DEVICE_ID_INTEL_GLK 0x31aa + +static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; +static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = { + { "reset-gpios", &reset_gpios, 1 }, + { "cs-gpios", &cs_gpios, 1 }, + { }, +}; + +static int dwc3_pci_quirks(struct pci_dev *pdev) +{ + if (pdev->vendor == PCI_VENDOR_ID_AMD && + pdev->device == PCI_DEVICE_ID_AMD_NL_USB) { + struct dwc3_platform_data pdata; + + memset(&pdata, 0, sizeof(pdata)); + + pdata.has_lpm_erratum = true; + pdata.lpm_nyet_threshold = 0xf; + + pdata.u2exit_lfps_quirk = true; + pdata.u2ss_inp3_quirk = true; + pdata.req_p1p2p3_quirk = true; + pdata.del_p1p2p3_quirk = true; + pdata.del_phy_power_chg_quirk = true; + pdata.lfps_filter_quirk = true; + pdata.rx_detect_poll_quirk = true; + + pdata.tx_de_emphasis_quirk = true; + pdata.tx_de_emphasis = 1; + + /* + * FIXME these quirks should be removed when AMD NL + * taps out + */ + pdata.disable_scramble_quirk = true; + pdata.dis_u3_susphy_quirk = true; + pdata.dis_u2_susphy_quirk = true; + + return platform_device_add_data(pci_get_drvdata(pdev), &pdata, + sizeof(pdata)); + } + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_BYT) { + struct gpio_desc *gpio; + + acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev), + acpi_dwc3_byt_gpios); + + /* + * These GPIOs will turn on the USB2 PHY. Note that we have to + * put the gpio descriptors again here because the phy driver + * might want to grab them, too. + */ + gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); + + gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(gpio)) + return PTR_ERR(gpio); + + if (gpio) { + gpiod_set_value_cansleep(gpio, 1); + gpiod_put(gpio); + usleep_range(10000, 11000); + } + } + + if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS && + (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 || + pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI || + pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) { + + struct dwc3_platform_data pdata; + + memset(&pdata, 0, sizeof(pdata)); + pdata.usb3_lpm_capable = true; + pdata.has_lpm_erratum = true; + pdata.dis_enblslpm_quirk = true; + + return platform_device_add_data(pci_get_drvdata(pdev), &pdata, + sizeof(pdata)); + } + + return 0; +} + +static int dwc3_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *dwc3; + int ret; + struct device *dev = &pci->dev; + + ret = pcim_enable_device(pci); + if (ret) { + dev_err(dev, "failed to enable pci device\n"); + return -ENODEV; + } + + pci_set_master(pci); + + dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); + if (!dwc3) { + dev_err(dev, "couldn't allocate dwc3 device\n"); + return -ENOMEM; + } + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc_usb3"; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = "dwc_usb3"; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(dev, "couldn't add resources to dwc3 device\n"); + goto err; + } + + pci_set_drvdata(pci, dwc3); + ret = dwc3_pci_quirks(pci); + if (ret) + goto err; + + dwc3->dev.parent = dev; + ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev)); + + ret = platform_device_add(dwc3); + if (ret) { + dev_err(dev, "failed to register dwc3 device\n"); + goto err; + } + + return 0; +err: + platform_device_put(dwc3); + return ret; +} + +static void dwc3_pci_remove(struct pci_dev *pci) +{ + acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev)); + platform_device_unregister(pci_get_drvdata(pci)); +} + +static const struct pci_device_id dwc3_pci_id_table[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, + PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), + }, + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, + PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI), + }, + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, + PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31), + }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, + { } /* Terminating Entry */ +}; +MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); + +static struct pci_driver dwc3_pci_driver = { + .name = "dwc3-pci", + .id_table = dwc3_pci_id_table, + .probe = dwc3_pci_probe, + .remove = dwc3_pci_remove, +}; + +MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer"); + +module_pci_driver(dwc3_pci_driver); |