1 files changed, 56 insertions, 3 deletions

diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 42844c2bc065..1d288fa4f4d6 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -111,8 +111,10 @@ static u32 lba_t32;
 
 
 /* Looks nice and keeps the compiler happy */
-#define LBA_DEV(d) ((struct lba_device *) (d))
-
+#define LBA_DEV(d) ({				\
+	void *__pdata = d;			\
+	BUG_ON(!__pdata);			\
+	(struct lba_device *)__pdata; })
 
 /*
 ** Only allow 8 subsidiary busses per LBA
@@ -1363,9 +1365,27 @@ lba_hw_init(struct lba_device *d)
 		WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG);
 	}
 
-	/* Set HF mode as the default (vs. -1 mode). */
+
+	/*
+	 * Hard Fail vs. Soft Fail on PCI "Master Abort".
+	 *
+	 * "Master Abort" means the MMIO transaction timed out - usually due to
+	 * the device not responding to an MMIO read. We would like HF to be
+	 * enabled to find driver problems, though it means the system will
+	 * crash with a HPMC.
+	 *
+	 * In SoftFail mode "~0L" is returned as a result of a timeout on the
+	 * pci bus. This is like how PCI busses on x86 and most other
+	 * architectures behave.  In order to increase compatibility with
+	 * existing (x86) PCI hardware and existing Linux drivers we enable
+	 * Soft Faul mode on PA-RISC now too.
+	 */
         stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL);
+#if defined(ENABLE_HARDFAIL)
 	WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#else
+	WRITE_REG32(stat & ~HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL);
+#endif
 
 	/*
 	** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal
@@ -1652,3 +1672,36 @@ void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
 	iounmap(base_addr);
 }
 
+
+/*
+ * The design of the Diva management card in rp34x0 machines (rp3410, rp3440)
+ * seems rushed, so that many built-in components simply don't work.
+ * The following quirks disable the serial AUX port and the built-in ATI RV100
+ * Radeon 7000 graphics card which both don't have any external connectors and
+ * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as
+ * such makes those machines the only PARISC machines on which we can't use
+ * ttyS0 as boot console.
+ */
+static void quirk_diva_ati_card(struct pci_dev *dev)
+{
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+	    dev->subsystem_device != 0x1292)
+		return;
+
+	dev_info(&dev->dev, "Hiding Diva built-in ATI card");
+	dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY,
+	quirk_diva_ati_card);
+
+static void quirk_diva_aux_disable(struct pci_dev *dev)
+{
+	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP ||
+	    dev->subsystem_device != 0x1291)
+		return;
+
+	dev_info(&dev->dev, "Hiding Diva built-in AUX serial device");
+	dev->device = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+	quirk_diva_aux_disable);