diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-osk.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-osk.c | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c new file mode 100644 index 000000000000..21103df50415 --- /dev/null +++ b/arch/arm/mach-omap1/board-osk.c @@ -0,0 +1,276 @@ +/* + * linux/arch/arm/mach-omap1/board-osk.c + * + * Board specific init for OMAP5912 OSK + * + * Written by Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/usb.h> +#include <asm/arch/mux.h> +#include <asm/arch/tc.h> +#include <asm/arch/common.h> + +static int __initdata osk_serial_ports[OMAP_MAX_NR_PORTS] = {1, 0, 0}; + +static struct mtd_partition osk_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_128K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data osk_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = osk_partitions, + .nr_parts = ARRAY_SIZE(osk_partitions), +}; + +static struct resource osk_flash_resource = { + /* this is on CS3, wherever it's mapped */ + .flags = IORESOURCE_MEM, +}; + +static struct platform_device osk5912_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &osk_flash_data, + }, + .num_resources = 1, + .resource = &osk_flash_resource, +}; + +static struct resource osk5912_smc91x_resources[] = { + [0] = { + .start = OMAP_OSK_ETHR_START, /* Physical */ + .end = OMAP_OSK_ETHR_START + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(0), + .end = OMAP_GPIO_IRQ(0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device osk5912_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), + .resource = osk5912_smc91x_resources, +}; + +static struct resource osk5912_cf_resources[] = { + [0] = { + .start = OMAP_GPIO_IRQ(62), + .end = OMAP_GPIO_IRQ(62), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device osk5912_cf_device = { + .name = "omap_cf", + .id = -1, + .dev = { + .platform_data = (void *) 2 /* CS2 */, + }, + .num_resources = ARRAY_SIZE(osk5912_cf_resources), + .resource = osk5912_cf_resources, +}; + +static struct platform_device osk5912_mcbsp1_device = { + .name = "omap_mcbsp", + .id = 1, +}; + +static struct platform_device *osk5912_devices[] __initdata = { + &osk5912_flash_device, + &osk5912_smc91x_device, + &osk5912_cf_device, + &osk5912_mcbsp1_device, +}; + +static void __init osk_init_smc91x(void) +{ + if ((omap_request_gpio(0)) < 0) { + printk("Error requesting gpio 0 for smc91x irq\n"); + return; + } + + /* Check EMIFS wait states to fix errors with SMC_GET_PKT_HDR */ + EMIFS_CCS(1) |= 0x2; +} + +static void __init osk_init_cf(void) +{ + omap_cfg_reg(M7_1610_GPIO62); + if ((omap_request_gpio(62)) < 0) { + printk("Error requesting gpio 62 for CF irq\n"); + return; + } + /* the CF I/O IRQ is really active-low */ + set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); +} + +static void __init osk_init_irq(void) +{ + omap_init_irq(); + omap_gpio_init(); + osk_init_smc91x(); + osk_init_cf(); +} + +static struct omap_usb_config osk_usb_config __initdata = { + /* has usb host connector (A) ... for development it can also + * be used, with a NONSTANDARD gender-bending cable/dongle, as + * a peripheral. + */ +#ifdef CONFIG_USB_GADGET_OMAP + .register_dev = 1, + .hmc_mode = 0, +#else + .register_host = 1, + .hmc_mode = 16, + .rwc = 1, +#endif + .pins[0] = 2, +}; + +static struct omap_board_config_kernel osk_config[] = { + { OMAP_TAG_USB, &osk_usb_config }, +}; + +#ifdef CONFIG_OMAP_OSK_MISTRAL + +#ifdef CONFIG_PM +static irqreturn_t +osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs) +{ + return IRQ_HANDLED; +} +#endif + +static void __init osk_mistral_init(void) +{ + /* FIXME here's where to feed in framebuffer, touchpad, and + * keyboard setup ... not in the drivers for those devices! + * + * NOTE: we could actually tell if there's a Mistral board + * attached, e.g. by trying to read something from the ads7846. + * But this is too early for that... + */ + + /* the sideways button (SW1) is for use as a "wakeup" button */ + omap_cfg_reg(N15_1610_MPUIO2); + if (omap_request_gpio(OMAP_MPUIO(2)) == 0) { + int ret = 0; + omap_set_gpio_direction(OMAP_MPUIO(2), 1); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); +#ifdef CONFIG_PM + /* share the IRQ in case someone wants to use the + * button for more than wakeup from system sleep. + */ + ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), + &osk_mistral_wake_interrupt, + SA_SHIRQ, "mistral_wakeup", + &osk_mistral_wake_interrupt); + if (ret != 0) { + omap_free_gpio(OMAP_MPUIO(2)); + printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n", + ret); + } else + enable_irq_wake(OMAP_GPIO_IRQ(OMAP_MPUIO(2))); +#endif + } else + printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n"); +} +#else +static void __init osk_mistral_init(void) { } +#endif + +static void __init osk_init(void) +{ + osk_flash_resource.end = osk_flash_resource.start = omap_cs3_phys(); + osk_flash_resource.end += SZ_32M - 1; + platform_add_devices(osk5912_devices, ARRAY_SIZE(osk5912_devices)); + omap_board_config = osk_config; + omap_board_config_size = ARRAY_SIZE(osk_config); + USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + + osk_mistral_init(); +} + +static void __init osk_map_io(void) +{ + omap_map_common_io(); + omap_serial_init(osk_serial_ports); +} + +MACHINE_START(OMAP_OSK, "TI-OSK") + /* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = osk_map_io, + .init_irq = osk_init_irq, + .init_machine = osk_init, + .timer = &omap_timer, +MACHINE_END |