Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rc.c b/drivers/net/wireless/realtek/rtlwifi/rc.c
new file mode 100644
index 000000000000..74c14ce28238
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rc.c
@@ -0,0 +1,302 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "rc.h"
+
+/*
+ *Finds the highest rate index we can use
+ *if skb is special data like DHCP/EAPOL, we set should
+ *it to lowest rate CCK_1M, otherwise we set rate to
+ *highest rate based on wireless mode used for iwconfig
+ *show Tx rate.
+ */
+static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
+				  struct ieee80211_sta *sta,
+				  struct sk_buff *skb, bool not_data)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_sta_info *sta_entry = NULL;
+	u8 wireless_mode = 0;
+
+	/*
+	 *this rate is no use for true rate, firmware
+	 *will control rate at all it just used for
+	 *1.show in iwconfig in B/G mode
+	 *2.in rtl_get_tcb_desc when we check rate is
+	 *      1M we will not use FW rate but user rate.
+	 */
+
+	if (sta) {
+		sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+		wireless_mode = sta_entry->wireless_mode;
+	}
+
+	if (rtl_is_special_data(rtlpriv->mac80211.hw, skb, true, false) ||
+	    not_data) {
+		return 0;
+	} else {
+		if (rtlhal->current_bandtype == BAND_ON_2_4G) {
+			if (wireless_mode == WIRELESS_MODE_B) {
+				return B_MODE_MAX_RIX;
+			} else if (wireless_mode == WIRELESS_MODE_G) {
+				return G_MODE_MAX_RIX;
+			} else if (wireless_mode == WIRELESS_MODE_N_24G) {
+				if (get_rf_type(rtlphy) != RF_2T2R)
+					return N_MODE_MCS7_RIX;
+				else
+					return N_MODE_MCS15_RIX;
+			} else if (wireless_mode == WIRELESS_MODE_AC_24G) {
+				return AC_MODE_MCS9_RIX;
+			}
+			return 0;
+		} else {
+			if (wireless_mode == WIRELESS_MODE_A) {
+				return A_MODE_MAX_RIX;
+			} else if (wireless_mode == WIRELESS_MODE_N_5G) {
+				if (get_rf_type(rtlphy) != RF_2T2R)
+					return N_MODE_MCS7_RIX;
+				else
+					return N_MODE_MCS15_RIX;
+			} else if (wireless_mode == WIRELESS_MODE_AC_5G) {
+				return AC_MODE_MCS9_RIX;
+			}
+			return 0;
+		}
+	}
+}
+
+static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
+				    struct ieee80211_sta *sta,
+				    struct ieee80211_tx_rate *rate,
+				    struct ieee80211_tx_rate_control *txrc,
+				    u8 tries, char rix, int rtsctsenable,
+				    bool not_data)
+{
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	struct rtl_sta_info *sta_entry = NULL;
+	u8 wireless_mode = 0;
+	u8 sgi_20 = 0, sgi_40 = 0, sgi_80 = 0;
+
+	if (sta) {
+		sgi_20 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20;
+		sgi_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
+		sgi_80 = sta->vht_cap.cap & IEEE80211_VHT_CAP_SHORT_GI_80;
+		sta_entry = (struct rtl_sta_info *)sta->drv_priv;
+		wireless_mode = sta_entry->wireless_mode;
+	}
+	rate->count = tries;
+	rate->idx = rix >= 0x00 ? rix : 0x00;
+	if (rtlpriv->rtlhal.hw_type == HARDWARE_TYPE_RTL8812AE &&
+	    wireless_mode == WIRELESS_MODE_AC_5G)
+		rate->idx += 0x10;/*2NSS for 8812AE*/
+
+	if (!not_data) {
+		if (txrc->short_preamble)
+			rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
+		if (mac->opmode == NL80211_IFTYPE_AP ||
+			mac->opmode == NL80211_IFTYPE_ADHOC) {
+			if (sta && (sta->ht_cap.cap &
+				    IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+				rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+			if (sta && (sta->vht_cap.vht_supported))
+				rate->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH;
+		} else {
+			if (mac->bw_40)
+				rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+			if (mac->bw_80)
+				rate->flags |= IEEE80211_TX_RC_80_MHZ_WIDTH;
+		}
+
+		if (sgi_20 || sgi_40 || sgi_80)
+			rate->flags |= IEEE80211_TX_RC_SHORT_GI;
+		if (sta && sta->ht_cap.ht_supported &&
+		    ((wireless_mode == WIRELESS_MODE_N_5G) ||
+		     (wireless_mode == WIRELESS_MODE_N_24G)))
+			rate->flags |= IEEE80211_TX_RC_MCS;
+	}
+}
+
+static void rtl_get_rate(void *ppriv, struct ieee80211_sta *sta,
+			 void *priv_sta,
+			 struct ieee80211_tx_rate_control *txrc)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct sk_buff *skb = txrc->skb;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_rate *rates = tx_info->control.rates;
+	__le16 fc = rtl_get_fc(skb);
+	u8 try_per_rate, i, rix;
+	bool not_data = !ieee80211_is_data(fc);
+
+	if (rate_control_send_low(sta, priv_sta, txrc))
+		return;
+
+	rix = _rtl_rc_get_highest_rix(rtlpriv, sta, skb, not_data);
+	try_per_rate = 1;
+	_rtl_rc_rate_set_series(rtlpriv, sta, &rates[0], txrc,
+				try_per_rate, rix, 1, not_data);
+
+	if (!not_data) {
+		for (i = 1; i < 4; i++)
+			_rtl_rc_rate_set_series(rtlpriv, sta, &rates[i],
+						txrc, i, (rix - i), 1,
+						not_data);
+	}
+}
+
+static bool _rtl_tx_aggr_check(struct rtl_priv *rtlpriv,
+			       struct rtl_sta_info *sta_entry, u16 tid)
+{
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+
+	if (mac->act_scanning)
+		return false;
+
+	if (mac->opmode == NL80211_IFTYPE_STATION &&
+	    mac->cnt_after_linked < 3)
+		return false;
+
+	if (sta_entry->tids[tid].agg.agg_state == RTL_AGG_STOP)
+		return true;
+
+	return false;
+}
+
+/*mac80211 Rate Control callbacks*/
+static void rtl_tx_status(void *ppriv,
+			  struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta,
+			  struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
+	__le16 fc = rtl_get_fc(skb);
+	struct rtl_sta_info *sta_entry;
+
+	if (!priv_sta || !ieee80211_is_data(fc))
+		return;
+
+	if (rtl_is_special_data(mac->hw, skb, true, true))
+		return;
+
+	if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
+	    is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
+		return;
+
+	if (sta) {
+		/* Check if aggregation has to be enabled for this tid */
+		sta_entry = (struct rtl_sta_info *) sta->drv_priv;
+		if ((sta->ht_cap.ht_supported) &&
+		    !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
+			if (ieee80211_is_data_qos(fc)) {
+				u8 tid = rtl_get_tid(skb);
+				if (_rtl_tx_aggr_check(rtlpriv, sta_entry,
+						       tid)) {
+					sta_entry->tids[tid].agg.agg_state =
+						RTL_AGG_PROGRESS;
+					ieee80211_start_tx_ba_session(sta, tid,
+								      5000);
+				}
+			}
+		}
+	}
+}
+
+static void rtl_rate_init(void *ppriv,
+			  struct ieee80211_supported_band *sband,
+			  struct cfg80211_chan_def *chandef,
+			  struct ieee80211_sta *sta, void *priv_sta)
+{
+}
+
+static void rtl_rate_update(void *ppriv,
+			    struct ieee80211_supported_band *sband,
+			    struct cfg80211_chan_def *chandef,
+			    struct ieee80211_sta *sta, void *priv_sta,
+			    u32 changed)
+{
+}
+
+static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	return rtlpriv;
+}
+
+static void rtl_rate_free(void *rtlpriv)
+{
+	return;
+}
+
+static void *rtl_rate_alloc_sta(void *ppriv,
+				struct ieee80211_sta *sta, gfp_t gfp)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_rate_priv *rate_priv;
+
+	rate_priv = kzalloc(sizeof(struct rtl_rate_priv), gfp);
+	if (!rate_priv) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "Unable to allocate private rc structure\n");
+		return NULL;
+	}
+
+	rtlpriv->rate_priv = rate_priv;
+
+	return rate_priv;
+}
+
+static void rtl_rate_free_sta(void *rtlpriv,
+			      struct ieee80211_sta *sta, void *priv_sta)
+{
+	struct rtl_rate_priv *rate_priv = priv_sta;
+	kfree(rate_priv);
+}
+
+static struct rate_control_ops rtl_rate_ops = {
+	.name = "rtl_rc",
+	.alloc = rtl_rate_alloc,
+	.free = rtl_rate_free,
+	.alloc_sta = rtl_rate_alloc_sta,
+	.free_sta = rtl_rate_free_sta,
+	.rate_init = rtl_rate_init,
+	.rate_update = rtl_rate_update,
+	.tx_status = rtl_tx_status,
+	.get_rate = rtl_get_rate,
+};
+
+int rtl_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&rtl_rate_ops);
+}
+
+void rtl_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&rtl_rate_ops);
+}